Jump to content
SAU Community

Recommended Posts

Its not just a NSW think unfortunately...

Some of you may remember the same thing was tried on me here in QLD a few months back... They nudged the side of my car, I stopped, realised what was going on then took of... They followed me at high speed for another 5 minutes until I got away...

Everyone just be carefull and if you can, dont get out of your car and drive off...

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Anyone know what ethnic minority these thieves were?

Stuff like this makes me sick but do we really need ignorant bull$hit like this thrown around? Are you really that much of a racist?

Adrian

Originally posted by 2rismo

Stuff like this makes me sick but do we really need ignorant bull$hit like this thrown around?  Are you really that much of a racist?

Adrian

How is it racist? You don't even know my ethnicity, nor which "race" I was commenting on. For the record, I wasn't commenting on any specific race (in fact the question left the answer open to "Australian", maybe I should have left the word "minority" out) and I am not of white Australian decent myself.

I will admit that I think a gang of white Australians would be the least likely type of people to carry out such an act. If the gang was Aussie I will be surprised, but I'm not saying it would be impossible.

How is it racist? You assumed that this gang of crooks were from an ethnic minority. That's racist in anyone's book mate. I accept however, that you may have chosen the wrong way to express yourself and the question you REALLY intended to ask.

I don't HAVE to know your nationality. Why should I care?!? I didnt imply that you singled a particular race in general. Do you beleive that's the ONLY way to be racist? Come on.

More to the point, think of this. What does it MATTER what nationality the crooks are?

A bit more thought next time hey?

ppl let ya know on wednesday 01/10/03 nite there was another car jacking, involving my mate he drives a WRX, stocky from outside 4 guys with a balaclava approached and jacked him. @ seven hills entrance to M2. 3 cars blocked him in and approached his car he was so nervous cant even remeber what type of cars they were.

Took of with his car he had a tracker found it within 5 minutes axel was broken 10 m minutes later another rex was jacked in the same area!

in the gladesville area mostly islanders/aussie guys do that kind of thing

how do i know?

im from the area and couple guys got caught doing this type of sh*t before and they went to school with some ppl i know

also one guy who died doing a ram raid in leichardt area was from gladesville he was aussie as well

call me racist or wat ever else you want but im just stating the facts

This is scaring me to death. All the shit I hear about car jacking lately. I am considering for going full comp insurance in favor of a tracking system.

but I agree with XEQTOR there, If I happen to get blocked in or chased, they better be crazy to follow me or have a gun, anything else and they will be tasting club lock right in the GOD DAMN TEETH!

Most car jackers do have guns. I was suprised to hear that this bunch didn't (maybe they are just clueless). I know personally of 1 person that has been carjacked with a pistol (and his car joyridden briefly and written off) and know third hand of 1 or 2 others.

I would cry if it happens to me, now I can see reasons for why people want gun licenses. the government are cracking down on guns but there still seem to be too many out there, or weapons of any sort. like when that kid walked into the school yard and shot his ex girlfriend with a crossbow.

when things like this happens, you need to stop and think what makes us any different from animals?

A guy I know owns a phat looking 01WRX. really nice car. goes reasonably well and looks hot. he also lives in bankstown, so I was told the other day the cops pulled him over and when they were checked over the car discovered a metal batton he has made for himself. when the police questioned him on it he explained what it was for and where he lived with the type of car he drove, they let him off.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...