Jump to content
SAU Community

Recommended Posts

im thinking of buying a plug in diagnostic scanner that will do all local shit and and all imports till current! these things arnt cheap but they do awsome stuff, graph every sensor output, data log as you drive to gain a snap shot of faults that happen irregularly and a whole heap of other gear.

whats everyones thoughts on me purchasing such a device?

im a qualified mechanic by day, just looking for abit of wkend/after hours work to do in addition to doing timing belts and the like.

Link to comment
https://www.sau.com.au/forums/topic/261716-diagnostic-scan-tool/
Share on other sites

nope, only factory ecus, bcms, trans computers and the like. as far as i know, any laptop with the correct softwear will access aftermarket ecu's.

Well, if you can find a working piece of software that does HICAS diags, then you'll be in business. I know Conzult 300zx version has HICAS diags that works on skylines with the OBD1 connector but it costs around $500. I have a consult cable from PLMS myself and some of the free software is nice but not as in depth as one would have hoped. I also have a hexterm program which allows me to send commands to the ECU/HICAS/Auto Trans/Aircon systems but unfortunately the registers I have as a reference don't match up.

I for one would like my HICAS fixed properly, so if you can get a tool to scan codes, I'll be your first customer ;P

-D

ebay !!!!

"nissan consult" search ebay :)

should get it today / tomorrow

Ahh shit tangles, you're going to get a free copy of Conzult SX.... which is virtually f'n useless Im sad to say ;\

Now, If I could just find a cheap copy of Conzult ZX floating around, I'd be sorted

-D

ill make afew calls to find out if the one im looking at will do HICAS, if so i think i will get it.

anything else that would be of any use to anyone that i should find out about?

Aside from something that does comprehensive ECU work (something the same league as conzult zx but for rb26's) would be good but tbh I think the HICAS diags are the one that is sorely lacking from around here.... You could also buy software which gets codes from the climate control unit and the automatic transmission but I'm not sure theres high demand for either (esp when you can easily get diag info from the climate control and automatics are usually taken to an auto specialist anyhow)

-D

the one im looking at does auto trans, ABS, airbag and stuff like knock sensor output, AFM voltage, occilascope (spelling) for individual coils. it has the builtin softwear for 32-34gtr's.

i will also ask if it caters for ATESSA.

the one im looking at does auto trans, ABS, airbag and stuff like knock sensor output, AFM voltage, occilascope (spelling) for individual coils. it has the builtin softwear for 32-34gtr's.

i will also ask if it caters for ATESSA.

Hrm it sounds pretty comprehensive ... let me know when you've got it and I'll bring my GTR over ;D

-D

the nissan consult can read the following programs, find them on the net and d/load

Features :

- Interface fitting for 14pin Consult Port of Nissan vehicles.

- Heavy & robust casing for rough service use

- Connects to PC via RS232

- Powered from car battery over 14pin Consult Port of Nissan vehicles.

- LED to control power and clock function

What can you do with this interface?

- Monitor and Log dozens of realtime parameters

- Check and clear engine fault codes before going to an expensive auto shop

- Adjust the timing and idle

- Power balance testing

- Reset the self-learn codes

- Control idle air valves, relays (AC, fans, etc), timing

- Diagnose customer vehicles on-site

- Speed up troubleshooting of electronically monitored components

Available software working with this Interface:

(Note that some of it is not free and need to be purchased)

DDLreader: DDLreader v.15c / DDLreader v.16c

ConZult

ScanTechNissan

Z-Control

SRTalk v.1.0

ZCSetup v.2.0

ZTalk v.1.1

Nissan Data Scan v.1.4

Nissan Data Scan v.1.51

was thinking of adding some stuff like this into Nistune for my R34 ... HICAS, trans controller etc. Just a matter of finding time to do it. Keep in mind also, with the earlier vehicles like R32 you wont get as many outputs as the later models

was thinking of adding some stuff like this into Nistune for my R34 ... HICAS, trans controller etc. Just a matter of finding time to do it. Keep in mind also, with the earlier vehicles like R32 you wont get as many outputs as the later models

Hey Matt

Do you have the sheet with the registers for the early ECU's? I can send them to you if you like.

I'm not quite sure how accurate the HICAS registers up. I know the init code works fine and I can turn streaming on and off for different registers but considering it streams in multiple hex characters I really don't know how to decipher it.

I already have a cable, if you want to add any features and need it tested on a 32 gtr, I'd be keen to do that..

-D

you mean this one?

http://www.plmsdevelopments.com/images_ms/...table_Ver_2.pdf

i've never had a vested interest (ie car) until now to start mucking aruond with this stuff. but would be good to try out now i've got the 34

we have S-HICAS ECU table, AIRCON table and A/T ECU tables here. Yeah would be good to sort out the HICAS and A/T ones at least. I dont think anyone cares too much about the aircond ...

I dont have an A/T ECU here to test that stuff on since I purposely got a M/T so that might need some hunting down for an ECU which supports this (or separate A/T controller off earlier vehicle)

Edited by darkhalf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...