Jump to content
SAU Community

Recommended Posts

Speaking of interior lights, I left one on, on Sunday. Flat battery this morning :)

Ended up buying a battery charger at Dick Snap in town, will be all good in the morning.

Although I wonder if it is possible to get to the toolkit in the boot with no power, as the boot release is electronic and I'm only aware of the rear seat release inside the boot? I had tools at home but it made me wonder...

Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-4513214
Share on other sites

I've used a few globes from here http://www.ledsales.com.au/cart.php?target...;category_id=35

I'm going to be purchasing some of the LED light ribbon type to put in the sun visor mirrors as well as in the glove box.

I've done my doors and interior lights, I will post pics once I have them :P

Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-4515267
Share on other sites

I've used a few globes from here http://www.ledsales.com.au/cart.php?target...;category_id=35

I'm going to be purchasing some of the LED light ribbon type to put in the sun visor mirrors as well as in the glove box.

I've done my doors and interior lights, I will post pics once I have them ;)

oh cool i was thinking of doing the rest as well.... u wouldnt know wat type of bulbs are for the boot light, glove compartment and the ash tray light by any chance wud u? :P

Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-4515406
Share on other sites

oh cool i was thinking of doing the rest as well.... u wouldnt know wat type of bulbs are for the boot light, glove compartment and the ash tray light by any chance wud u? :ermm:

The boot uses the wedge type globe, I put in a 6 LED kit, bright but doesn't seem to flood the boot enough. Will look to see if there is anything else that can. My last car I wired in Neon light :D

Glove box has a real small wedge (maybe, have to check again) type globe so I'm not sure if I'll find a LED type so I'm going to wire in one of those ribbon type kit from the site I posted up before.

Edited by Pulp
Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-4516648
Share on other sites

  • 4 weeks later...
  • 9 months later...
Hi all,

Wondering if anyone could help... the lights under the doors don't work. ive replaced globes and still don;t work? everything else is fine...

is there a fuse for them? any help would be appreciated

thanks

Yeah check your fuses. Up and to the right of your accelerator are the fuses. Don't know which one but if everything else is working it might not be a fuse. Get and auto sparky in the end.

Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-5075007
Share on other sites

Yeah check your fuses. Up and to the right of your accelerator are the fuses. Don't know which one but if everything else is working it might not be a fuse. Get and auto sparky in the end.

thanks for the reply, yeah bit strange that the dome lights work at the door ones dont :D

i've checked all three fuse boxes all seem ok.

cheers

Link to comment
https://www.sau.com.au/forums/topic/263148-v35-mods/page/2/#findComment-5075278
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...