Jump to content
SAU Community

Hennessey 700hp Package @ $26k Aud For The Bits


Recommended Posts

http://www.themotorreport.com.au/25518/hen...age/#more-25518

* 0-60 mph: 2.8 sec. (stock = 3.4)

* 0-100 mph: 6.7 sec. (stock = 8.3)

* 0-150 mph: 14.5 sec. (stock = 19.5 sec.)

* 0-186 mph: 24.7 sec. (stock = 53.3 sec.)

* 1/4 mile: 10.8 sec. @ 133 mph (stock = 11.8 sec. @ 118 mph)

Check out the Utube video of the car on Hennessey's website. The acceleration of the car is bloody brutal. Must put a lot of stress on the tranny, surely you'd have to upgrade the internals for long term reliability.

http://www.hennesseyperformance.com/ItemDe...ActionReq=Where

Edited by GT-R OZ

Trans upgrade is included. You can get a gearset from PPG.

Brakes - only required if you will do any serious track work. Any production car has crap brakes for serious track work and needs at minimum upgraded pads and disks.

1/4 mile time is still a bit slow considering boosted stock turbos and a good launch get the car to run low 11s, high 10s.

From link:

Power:

715 hp @ 6,500 rpm

662 lb-ft Torque @ 4,100 rpm

Performance:

0-60 mph: 2.8 sec. (stock = 3.4)

0-100 mph: 6.7 sec. (stock = 8.3)

0-150 mph: 14.5 sec. (stock = 19.5 sec.)

0-186 mph: 24.7 sec. (stock = 53.3 sec.) 1/4 mile: 10.8 sec. @ 133 mph (stock = 11.8 sec. @ 118 mph)

Includes:

SUMO ™ Stainless Steel 88 mm Catback Exhaust System

SUMO ™ Stainless Steel Midpipe Exhaust

SUMO ™ Engine Management Computer Programmer (17 psi boost)

SUMO ™ Intercooler Piping Upgrade

SUMO ™ Inlet Piping Upgrade with Stainless Steel Blow-off Valves

SUMO ™ Sport Turbo Upgrade – Modified Factory Turbos with 47 mm Compressor Wheels (stock compressor wheels = 42 mm)

SUMO ™ Modified Factory Wastegate Actuators

SUMO ™ 100 mm High-Flow Cold Air Induction

Modified Factory Mass Air Sensors

High-Flow Fuel Injectors with Custom Calibration

Transission Cooler Upgrade

Transission Clutch Pack Upgrade

Professional Installation

All Necessary Gaskets & Fluids

Chassis Dyno Tuning & Engine Management Calibration

Powered by Hennessey Custom Floor Mats

Limited Edition GTR700 Plaque in Interior & Engine Compartment

Factory Engine Cover in Red with black GTR600 Badges

Hennessey & GTR700 Exterior Badges

The GTR700 kit is also available via mail order and it can also be exported internationally.

Optional Upgrades:

SUMO ™ Electronic Exhaust Cutout (75 mm)

KW Variant 3 Adjustable Coilover Suspension Upgrade

HRE C91 Light Weight Alloy Wheel Upgrade (set of 4)

SUMO ™ Brand Hennessey Performance Engineering (HPE) is proud to introduce its own line of high-performance parts & accessories for the R35 Nissan GTR. As the name implies, our SUMO ™ performance brand is big and powerful. Each individual component included in the GTR700 upgrade is available individually on a mail-order basis. GTR owners can order SUMO ™ performance parts from HPE by calling or by visiting the company’s new web store at HennesseyPerformanceStore.com

  • 8 months later...
  • 1 month later...
  • 1 month later...

Having read several write ups on Hennessey on other forums, I'd suggest you steer clear of them.

If you send money, you may not get your parts, if you send your car to them, you may not get it back and if you buy a car from them, expect to find some nasty surprises!

Just buy the equivalent HKS parts, apparently Hennessey just copied them anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...