Jump to content
SAU Community

Recommended Posts

Heya,

Was just wondering if moving the battery to the boot was beneficial at all?

Can you move the battery into the boot and use the space under the bonnet to tidy up the engine bay?

Looking here:

DSC01467.jpg

They look like battery terminals? Is that an overflow tank? This just replaces the existing plastic one right?

Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/
Share on other sites

Heya,

Was just wondering if moving the battery to the boot was beneficial at all?

Can you move the battery into the boot and use the space under the bonnet to tidy up the engine bay?

They look like battery terminals? Is that an overflow tank? This just replaces the existing plastic one right?

I have my car battery in the boot. Is that battery for car audio amps(cause it has the 'Kicker' brand on the terminal covers...)? I thought all R33's had the battery in the boot. I am not sure, sorry if I am incorrect.

Edited by parkie
Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/#findComment-4530358
Share on other sites

my battery is in the boot. this = more room in the engine bay. the above pic shows me a radiator overflow and catch can in 1 and a battery. the battery is what the kicker terminals are connected to. nicely made catch can/overflow bottle. putting the battery in the boot of a 32 moves some of the weight backward. some ppl say that this is a benefit.

Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/#findComment-4531064
Share on other sites

Ah ok, that makes sense.

Anyone with a 32 that has relocated their battery?

Are 34s in the boot stock?

If you re-locate the battery > the boot,

i) you can arrange for a +ve terminal to remain under the bonnet (with a plastic cap) and

ii) the battery in the boot should be a sealed unit.

My R34 has its battery in the boot as standard; to answer 1 of your other Qs.

Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/#findComment-4531650
Share on other sites

If you re-locate the battery > the boot,

i) you can arrange for a +ve terminal to remain under the bonnet (with a plastic cap) and

ii) the battery in the boot should be a sealed unit.

My R34 has its battery in the boot as standard; to answer 1 of your other Qs.

dry cell batteries can be mounted straight into the boot. standard batteries need to be vented to the outside.

Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/#findComment-4532573
Share on other sites

  • 2 months later...

This is my battery removal effort in the front, under the rubber cover is the connection of the +ve, starter and wireloom, it can be pulled out of the way if I need to jump the car. I ran the +ve cable though the cabin and into the boot where I have a battery box and new earth.

post-20826-1245585398_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/265185-battery-in-boot/#findComment-4670368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...