Jump to content
SAU Community

Recommended Posts

Would you sell rear calipers & pads only?

Yeah mate, will sell them. $250 for the pair with the pads and brake lines and whatever bolts etc hold calipers and associated brackets on

Cheers

are there still seats? if so what condition are they in? if madaz doesn't take the turbos i will

Hey mate, madaz doesnt want the turbos anymore, Do you still want them? $1600 and they are all yours, and you are quite welcome to take them to a turbo place to get a second opinion on them if you wish, but i will give you my word, they are in really good condition, dont seem very old and are complete.

Cheers,

Michael

any chance you still have the front bar? and how much would you want for all of the seats? . cheers

Sorry mate, No good with the front bar,

Drivers seat is damaged( Bent frame and rips in the fabric, Inrepairable i reckon)

Have got passenger seat $250, Have still got rear seat, $100 for that.

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

post-61423-1241080866_thumb.jpg[

Hey guys, picture of 1 set of wheels for sale, Sparco multi-stud racing wheels, 2x 17x9+38 suit 255 wide tires and 2x 17x8+32 suit 235 wide tires. Holden/toyota and nissan/ford stud pattern. 1 wheel has got some gutter rash, the rest are in good nick. 10 wheel nuts and wheel nut tool included. NO tires

Came off a toyota supra, would probably be right offset for GTS-T as well

Would be good for 2nd set of wheels with R Spec rubber for your track days.

$500ono

Cheers,

Michael

have only got the left one, 150 coins and it is all yours

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

Sorry mate, i thought i put a front photo on too, my bad. yeah it is the bug eye type of lense

Cheers,

Hey mate, did you still want the headlight or not? Have had a couple other people interested thats all. I dont mind holding it for a week if you need to get the money, just please let me know if you dont want it anymore

Thanks,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...