Jump to content
SAU Community

Recommended Posts

Hi everyone

I know there's already a tyre thread, but I have found out recently that the old prices no longer apply and I need some suggestions on new rubber.

I currently run federal 595's in 245/45/17 - I know 235/45/17 is a LOT cheaper as its dunnydore/falcoon size and id be open to the idea of going to a slightly smaller but sticker tyres, however the stickier the tyre the faster it wears out right? So larger tyres that are a little bit harder would last longer and still provide the same level of preformance?

I have been happy with the performance of the 595 and I have had a few sets of them now, for cheapies they preform rather well, (I did pay 155 if memory serves for them back in the day) however my tyre contact has told me they are now 170 a corner and this has caused me to ask what else could be had for that sort of money.

Oh, I also live in brisbane, qld.

The car is used mostly for weekend driving and I live in and amongst the hills on the northside so I do tend to put a fair bit of strain on my tyres. Average tyre life so far has been 6 - 9 months, which I can live with considering my driving style. I also get out on the track when I can afford to do so however I am saving up for a set of semis so I dont know how much of a bearing that will have on this conversation.

Regards

Ian

my mate got some 215/45/17s falken azenis rt215s for his wrx on ebay for $250 a tyre... thats irrelevant to what you want, i know... but food for thought, hes had them on there for over a year now... regularly driven... and in anger... and they are still almost brand new.. that is the best $1000 hes spent on it.

i got quoted $330 a tyre for 235/45/17s toyo proxes r888's, which are super grippy semi slick and have a tuff looking tread pattern, which is pretty reasonable.

its worthwhile saving more $$ to get better tyres.

Im grabbing a set of KU36's in 235/45/17 from Option1

currently priced at 155 each:

http://www.nissansilvia.com/forums/index.p...howtopic=369686

I know their not a proper semi, but hopefully their performance shouldn't be too bad on the track. They probably wont last as long as the 595's have but im willing to live with this. They should outperform the 245/45/17 595's.

Sumitomo Z3 , I got 235/40/18 for $250 each. 235/40/17 SHOULD be around $210 a corner. Much better than 595SS which was my last set of tyres.

Stiffer sidewalls, more grip (especially in wet), quieter.

Edited by simpletool
Im grabbing a set of KU36's in 235/45/17 from Option1

currently priced at 155 each:

http://www.nissansilvia.com/forums/index.p...howtopic=369686

I know their not a proper semi, but hopefully their performance shouldn't be too bad on the track. They probably wont last as long as the 595's have but im willing to live with this. They should outperform the 245/45/17 595's.

they look like a good deal for the money. I couldn't imagine anything decent at $700 a set, but I reckon they will be the best buy you'll find. :blink: I may even grab some as spares. :wub:

Sumitomo Z3 , I got 235/40/18 for $250 each. 235/40/17 SHOULD be around $210 a corner. Much better than 595SS which was my last set of tyres.

Stiffer sidewalls, more grip (especially in wet), quieter.

i was considering 595SS, how bad was it in the wet?? fishtail?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...