Jump to content
SAU Community

Recommended Posts

check www.japanparts.com

http://www.japanparts.com/db/partslist.php...=2&small=11

Plenty of kits from ING, Nismo, Ken Style etc..

Not cheap though. IMO if you had 4-5K to spend on a full kit + paint and fitting, you would be better off getting a nice set of Jap 19s first. The coupe lines already looks good from factory.

from carmate. Lots of problems fitting. But it's finaly on and looks ok

same kit as the ugly orange V35 in Fast & Furious 4. "Kenstyle" copy

Holden VY fog lights should fit the KS kit

post-60315-1240224134_thumb.jpg

post-60315-1240224188_thumb.jpg

Edited by V35_Paul

So the fitment from carmate was pretty average?

Kenstyle isn't my taste, neither is the black X metal.

Just want something clean, perhaps the Ings or Impul. As for spending 5-6 K on rims don't think i'll be doing that. I've been down that path before and although yes it is nice to have work wheels etc.. But you can pick up some light weight racing rims in good sizes, 19 x 9 +22 and 19 x 10 +28 for 2K. I wont be taking it out the track or anything anyway.

So the fitment from carmate was pretty average?

Kenstyle isn't my taste, neither is the black X metal.

Just want something clean, perhaps the Ings or Impul. As for spending 5-6 K on rims don't think i'll be doing that. I've been down that path before and although yes it is nice to have work wheels etc.. But you can pick up some light weight racing rims in good sizes, 19 x 9 +22 and 19 x 10 +28 for 2K. I wont be taking it out the track or anything anyway.

They had to cut and patch the back bumper to get it to fit

IMO the ING and Top Secrect kit looks nice, simple, and makes the car sits flush. also not expensive (if it were the replica). other than that this would be the kit id put on my car :P

OMG! i think the doors and roof are the only things left original

there is one ing for sell in this forum, mayb u should act on it?

2k for 19" and light wheel? Wat brand and where is it made? It makes me sounds stupid to spend double on that..

+1.

I want to know what brand can get 2k for 19' lightweight. That is a really good price even for 2nd hand.

My 18' NISMO LMGT4 cost me 2900 with noise second hand bridgestone.

Yeah these came up at a good price, still not sure if I will get them though. These rims are 11.2kg (fronts) and Work Meisters and BBS LMs are 10.9kg in the same size and width. So they aren't as light as Japanese rims but not what I would really call heavy either. In the end it’s not going on the track etc so I really doesn't bother me. I know for some people having light rims etc is an essential and that’s great Work, BBS, SSR etc look fantastic, but for me I only want to buy new and they just aren't in my budget.

Yeah these came up at a good price, still not sure if I will get them though. These rims are 11.2kg (fronts) and Work Meisters and BBS LMs are 10.9kg in the same size and width. So they aren't as light as Japanese rims but not what I would really call heavy either. In the end it’s not going on the track etc so I really doesn't bother me. I know for some people having light rims etc is an essential and that’s great Work, BBS, SSR etc look fantastic, but for me I only want to buy new and they just aren't in my budget.

That sounds good. Thanks for sharing?

Any picture?

Are they Fodged?

wow...it looks HOT~!!! :banana:

lol. yerh a mate of mine showed me the link a while back. first time i saw it i fell in love (pure porn)! Its similiar to the aps Wide Body in a way but looks heaps better (more tough). i read the article somewhere the kit alone was 18-20k usd ;) and rims were 10k usd :worship: . alot of money. why can someone replicate these type of kits :P

lol. yerh a mate of mine showed me the link a while back. first time i saw it i fell in love (pure porn)! Its similiar to the aps Wide Body in a way but looks heaps better (more tough). i read the article somewhere the kit alone was 18-20k usd ;) and rims were 10k usd :worship: . alot of money. why can someone replicate these type of kits :P

i like this kit too, but not tat colour :banana: (personally taste or not, i don like it~~)

i too prefer simple lines

going to just go a simple kit

will post pictures when its done

will be a mix of a few kits, to get a good finish. look agressive and low without all the hoo-haa

how is it "simple", when it is MIXED up and looking AGGRESSIVE + LOW?

i thought when it says simple, it means more towards vip, less aggressive and 'normal-low'?

Or did i mis-understood? :)

how is it "simple", when it is MIXED up and looking AGGRESSIVE + LOW?

i thought when it says simple, it means more towards vip, less aggressive and 'normal-low'?

Or did i mis-understood? :P

it will look agressive for the fact the car is very low.

it will look simple for the bodykit does not have excessive or any for that fact holes, etc. to make the car look different

its kinda going for a vip look as you said.

dont worry u shall see in the near future. allready have 2 parts just waiting on the 3rd part once someone gets back...... then i can get it all prepped and fitted.

i want to respray my car black too... but i hate the fact of the swirl marks, so i might stick with a sort of darker silver / grey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List:
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...