Jump to content
SAU Community

Recommended Posts

Hey Guys,

I've done a search, but couldn't find anything. I know it's probably been asked before, if so just point me at the right place. Anyhoo, i was thinking of taking my car down to the wakie day (sounds awsome :D ), but i'm concerned that my rather stock car may break :woot: lol

mods are only: 3" full exhaust, r34 smic, high boost solenoid mod, and some rims.

My main points of concern are:

1. The guys that put my rims on also put some spacers. Not sure how serious this is, but it's in the back of my mind

2. My brakes. My rotors definitely need machining, as i can feel some shudder on hard deceleration. I would get that done beforehand, but will the stock breaks handle the intense work-out?

So my main question is has anyone taken a stock skyline to the track, and was it able to handle it?

I'm not expecting it to break any records, just want to make sure the car will be up to it.

Thanks in advance :D

Link to comment
https://www.sau.com.au/forums/topic/266325-tracking-a-stock-ish-skyline/
Share on other sites

Stock r33 GTST's actually have proved themselves very reliable at wakefield.

Bleed the brakes, make sure its got a lot of oil in it, dont bother washing it, then come have fun.

The brakes will have more wear than on the street (well, duh), but nothing to worry about as long as there's enough pad material left and the rotors arent too thin :woot:

lol what tyre place puts on spacers to fit wheels for u?

anyway, id check that.

but yeh, fluids and pads need to be checked, if ur pads have heaps of meat left just leave them and watch out for fade, but as far as fluid goes get something decent as fluid can boil and go without warning.

Marcus I ran my very stock gtst at a heap of track days for years and had almost no problems. Like yours it needed new discs/discs machined after every couple of track days, and as said above you should have new oil, properly bled brakes and a wheel alignment.

Just get a good workshop to check the car over and make sure everything is OK (they are getting old, it might need bushes replaced or similar), and get rid of the wheel spacers unless they are absolutely necessary.

Nissan built an amazingly capable car from the factory, don't be concerned about giving it a bit.....they love it.

MUST DO: Flush your brake system with a decent brake fluid like Motul RBF600 (I think thats the number). You WILL get brake fade after a few laps with just regular fluid.

Its more important than anything else, cause when youre coming into a corner and theres no brakes, fresh oil and a wheel alignment wont stop you from hitting a wall :woot:

Thanks for the replies guys. I'll get the brakes done this week - I've got some QFM pads ready to go on once the discs are machined. While they're there I can get them to bleed the brakes for me ;)

Now just the spacers to worry about... i had to go and get dished rims didn't I :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...