Jump to content
SAU Community

Recommended Posts

G-Zone would be better than the Nismo IMO.

Has the same low rpm response, but you can specify your boost levels, redline and they automatically remove the speed limiter (although I think that the Nismo has this removed as well).

Just note that the low end restriction modification is the "option" which is charged on top of the auction price.

Late last year, it cost 60,500Y for the complete G-Zone remap and yes, it is a changeover service - so you send your ECU to them, they remap it as best they can with your specs and then send it back to you.

Now I'm really confused then... why list it as an auction at all? >_<

Sounds like a good option, just not worth going through the auctions. Have to see if I can find another ECU first...

Now I'm really confused then... why list it as an auction at all? >_<

Sounds like a good option, just not worth going through the auctions. Have to see if I can find another ECU first...

They are listing it as a "service"

You see them all the time on YJ/IM...guard rolling/rotor painting, etc etc...

the fcon Is from what if found out is slightly more powerfull then the emange

the IS is like a emanage plus v manage in one unit so im sure it can do the same

and ye with no one runing fcon v pro i will soon so i wil be able to control my throttle etc etc :nyaanyaa:

well ill just get it all done and start posting a buil thread

but ecu is the first thing to go in so any thing else can be easily tuned in after

I dont think you read it, I will be running the Emanage as a standalone in a few weeks, with full cam control and a cable throttle for under $1000, beat that. :nyaanyaa:

A 4000 rpm launch should hopefully be on the cards if the box survives. lol.

Can't really see that you have no low end restriction considering that you sit it at 3000rpm before letting loose!

Can you send me a vid of your Stagea accelerating from standstill, in drive, from idle?

Watch the boost and when it start's to climb at a fast rate....2,500rpm!!!!

Car will still bog with no stall but full boost is about 3,000 - 3,200rpm.....it's to be expected with the turbo I have and standard stall converter.....before the Nismo ECU boost was not maxing until 5,000rpm and I could NEVER stall and release it like that!

I'll post up a launch with no stall tonight!

Edited by Jetwreck

I dont think you read it, I will be running the Emanage as a standalone in a few weeks, with full cam control and a cable throttle for under $1000, beat that. :nyaanyaa:

A 4000 rpm launch should hopefully be on the cards if the box survives. lol.

good job ,nice

like i said only hks dealers and tuners near me

I dont think you read it, I will be running the Emanage as a standalone in a few weeks, with full cam control and a cable throttle for under $1000, beat that. :nyaanyaa:

A 4000 rpm launch should hopefully be on the cards if the box survives. lol.

done any piston conrod work ?

i sen a nm35 snap a rod after being worked ?

been tld that the stock internals are good up to 350 kw saftly after that not so good ???

Edited by Sidius

Watch the boost and when it start's to climb at a fast rate....2,500rpm!!!!

Car will still bog with no stall but full boost is about 3,000 - 3,200rpm.....it's to be expected with the turbo I have and standard stall converter.....before the Nismo ECU boost was not maxing until 5,000rpm and I could NEVER stall and release it like that!

I'll post up a launch with no stall tonight!

and one from outside.

i couldnt get mine to stall above 2k rpm. if scottys works out, I know the path I'll be taking.

I stalled it last night to try and throttle Percentage on the informeter wouldnt go above 40% ish..

Now I'm really confused then... why list it as an auction at all? >_<

Sounds like a good option, just not worth going through the auctions. Have to see if I can find another ECU first...

I have a spare ECU if you want it!

done any piston conrod work ?

i sen a nm35 snap a rod after being worked ?

been tld that the stock internals are good up to 350 kw saftly after that not so good ???

Who told you that? I have spoken to a VQ30det owner with a TO4Z on it pushing 430wkw on the same rods, they must obviously be good for more than that as he was running that power for a year I think.

I havent done any rod work as I cant find replacements, and even if I got custom ones made, (you dont want to know the prices I got) they wouldnt be as strong as the stock ones. I will be going the 3.5 route anyway as soon as I can afford to rebuild the block I have here, should be good for over 800hp fairly easily.

The Emanage is a standalone if you put the engine in limp mode by the way.

Who told you that? I have spoken to a VQ30det owner with a TO4Z on it pushing 430wkw on the same rods, they must obviously be good for more than that as he was running that power for a year I think.

I havent done any rod work as I cant find replacements, and even if I got custom ones made, (you dont want to know the prices I got) they wouldnt be as strong as the stock ones. I will be going the 3.5 route anyway as soon as I can afford to rebuild the block I have here, should be good for over 800hp fairly easily.

The Emanage is a standalone if you put the engine in limp mode by the way.

have you got a vq30de your planing to build ? should be nice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...