Jump to content
SAU Community

Recommended Posts

I would try not to be rude to them but ask them to prove that it was you and your car. They will prob give you a warnig about it but if you admitt that it was you then they prob could.

I was speeding dowm Gnagara road and a cop pasted in the oppisite direction, I knew I was speeding and the cop knew I was speeding but because he didnt have any proof he only gace me a warning.

I think you are pretty safe mate

Nope they can't do jack.

They are trying to get you to confess by calling ya bluff.

This can fall under harrassment but is very hard to prove.

You should only answer each question driectly and politly. DO NOT give any addition information. Try to say less than more and get straight to the point.

I just got fined for an alleged 102 in a 70 zone (read: $250 + 4points)

I explained to the officer I couldn't have been going that fast as I just pulled out of a side street.... I asked to look at the radar and it was locked at 97km/h (read: $150 + 3 points)

He wrote the ticket for 100km still.... He says "You'll find it locked on 97km/h, but we saw you do 102"

Where do I stand on this ?

For the record, I didn't see my speedo go to 100 at all. I may be walking soon :(

Kym - I'm thinking you don't have much chance on this one. Their stance will more than likely just be that they took two readings, one at 102 and the second at 97.

HIPSI - good luck, if they don't have any evidence it could all disappear...

I sorta had a similar.

Whizzing down the freeway from Ocean reef, pass a motorbike cop stationary on the hard shoulder.

By Whitfords he had caught up. (Had watched him approach.))

Knowing he's there i stay on 100. Then his bloody lights come on pulls me over and trys to bust me for doing 110!

I say no... refuse to pay,

go to court twice. once to organise a date for the 2nd?!

On the day I present my RAC speedo check (was accurate)

and say Yes i saw him catch up yes i knew my speed was 100kmh

His "proof" was:

Him: "did you pass those cars doing 95Kmh?"

Me: Yes i did

"well you must of been speeding then!

Even the judge at this point said enough. waste of time. "dissmissed!"

(actually alot more was said, but thats dramatical license for you)

I take every speeding fine to court on principle.

Be very careful about what you admit to, as it will be read back as evidence in court - (no such thing as Miranda warning in Oz!)

As said above, be polite but deny everything. Less is more!

Write everything down as soon as you leave the scene and save the arguements for court. You have nothing to lose except for court costs of around $54 (last time I was there). More often than not I have had it either thrown out or at least discounted to the next lower bracket (which recovers your $50 odd bucks anyway).

BTW - I just recieved a summons posted to Bulgaria for a 70 in a 60 zone from July 2002!

I've been stringing this one out for a while now, so it will be interesting to see if they still have their Multinova calibration records for this period when I go to court in Jan next year!

Originally posted by Gav

I take every speeding fine to court on principle.

Be very careful about what you admit to, as it will be read back as evidence in court - (no such thing as Miranda warning in Oz!)

As said above, be polite but deny everything.  Less is more!

Write everything down as soon as you leave the scene and save the arguements for court.  You have nothing to lose except for court costs of around $54 (last time I was there).  More often than not I have had it either thrown out or at least discounted to the next lower bracket (which recovers your $50 odd bucks anyway).

BTW - I just recieved a summons posted to Bulgaria for a 70 in a 60 zone from July 2002!  

I've been stringing this one out for a while now, so it will be interesting to see if they still have their Multinova calibration records  for this period when I go to court in Jan next year!

Wouldn't some sort of record be kept on you and your alledged speeding fines?

Surely if they pick up that you've gone to court 5 times in 3 years, they can put together that your a lead foot.

This isn't a dig, just seems odd that they wouldn't eventually catch on, and screw you over?

Nope - only driving record is admissible, not the fact that you choose to defend it in court (as is your right). The more time I spend in other countries, the more I realise that Australia is becomming a police state.

I believe a lot of judges think along these lines also as they don't automatically side with the police prosecutor (who spends all day, everyday in court).

Also, the worst that can happen is that you are found guilty and given prescribed fine (which you will get anyway), plus court costs.

I guess it depends on how understanding your boss/lecturer is in giving you time off. Luckily my boss sides with me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...