Jump to content
SAU Community

R34 100k Service

Pandoraa

By Pandoraa,
in Engines & Forced Induction

 Share

Recommended Posts

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

Timing Belt is a MUST at 100,000kms.

Might as well do your fan belts.

The usual things,

Oil (Which you have done)

Oil Filter (Which you have done)

Fuel Filter

Air Filter / Air Pod (Just a clean will do)

Spark plugs (Which you have done)

Radiator Coolant flush

You could do your Gear Box and Diff Oils...

Check Brakes (Pads / Rotors / Calipers)

Your Tyres would need a check (tread level and air pressure level)

Tighten up bolts and over general check over of the car in and out.

The main things anyway, but if still unsure, take it to your mechanic and see what they say as they should know what is fully required at 100,000 kms.

Pandoraa Contributor

Pandoraa

Posted
  • Author
Posted
Timing Belt is a MUST at 100,000kms.

Might as well do your fan belts.

The usual things,

Oil (Which you have done)

Oil Filter (Which you have done)

Fuel Filter

Air Filter / Air Pod (Just a clean will do)

Spark plugs (Which you have done)

Radiator Coolant flush

You could do your Gear Box and Diff Oils...

Check Brakes (Pads / Rotors / Calipers)

Your Tyres would need a check (tread level and air pressure level)

Tighten up bolts and over general check over of the car in and out.

The main things anyway, but if still unsure, take it to your mechanic and see what they say as they should know what is fully required at 100,000 kms.

Alright thanks...

It is a good start.. I will take a look over everything and do what i can then take it into Nissan to complete the ods and ends..

83CKS Proficient

83CKS

Posted
Posted
as stated, do the timing belt, mine is at 96000 now and the timing belt is starting to look a bit cracked and perished (got the new gear on the way)

kudos motorsport sell a 100,000km service kit.

How much do they sell the Kit for??

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
Awesome!!

Sorry to hijack the thread, But do you know whats included in the kit?? (Off the top of your head)

http://www.skylinesaustralia.com/forums/Ni...0,000km+service

Nissan RB25DET (R34, C34 Neo Engine)

Price: Starting From Only $567.60

Standard Kit Components:

Genuine Nissan Timing Belt

NSK/NTN Idler & NSK/NTN Tension Bearing, Tensioner Spring

Genuine Nissan Cam Seals

Genuine Nissan Front Main Seal

Genuine Nissan Water Pump

Genuine Nissan Thermostat

Genuine Nissan Oil Filter

*Please note that NSK & NTN are the original equipment manufacture (OEM) of the Nissan timing belt idler & tensioner bearings.

Silver_GT Collaborator

Silver_GT

Posted
Posted

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

  • 1 year later...
nushtek Enthusiast

nushtek

Posted
Posted

is this kit still available?

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

jrm Veteran

jrm

Posted
Posted

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

is this kit still available?

It is - but doesn't doesn't include as much and costs more

Nissan RB25DET (R34, C34 Neo Engine) - Starting From Only$492.80

Standard Kit Components:

* Genuine Nissan Timing Belt (Optional Upgrade to Trust/GReddy or Gates Racing)

* Genuine Nissan Water Pump (Optional Upgrade to Nissan N1 Item, Where Applicable)

* NSK Timing Belt Idler Bearing (Ex RB20E)

* NSK Tension Belt Idler Bearing

* Genuine Nissan Tensioner Spring

* Genuine Nissan, or Aftermarket, Cam Seals

* Genuine Nissan, or Aftermarket, Front Main Crank Seal

Ref: http://www.skylinesaustralia.com/forums/Ni...vi-t137554.html

nushtek Enthusiast

nushtek

Posted
Posted

thanks man, i will check it out

is this kit still available?

It is - but doesn't doesn't include as much and costs more

Nissan RB25DET (R34, C34 Neo Engine) - Starting From Only$492.80

Standard Kit Components:

* Genuine Nissan Timing Belt (Optional Upgrade to Trust/GReddy or Gates Racing)

* Genuine Nissan Water Pump (Optional Upgrade to Nissan N1 Item, Where Applicable)

* NSK Timing Belt Idler Bearing (Ex RB20E)

* NSK Tension Belt Idler Bearing

* Genuine Nissan Tensioner Spring

* Genuine Nissan, or Aftermarket, Cam Seals

* Genuine Nissan, or Aftermarket, Front Main Crank Seal

Ref: http://www.skylinesaustralia.com/forums/Ni...vi-t137554.html

  • 6 months later...
Blue Dog Newbie

Blue Dog

Posted
Posted

Just wondering how you went with your service? I'm attempting it on my 34 also and I have found leaky cam seals. Problem is I need to get the VVT actuator off. Do you know if the nut is reverse thread or not?

There is a notch on the Allen key head which sometimes means reverse thread, either way it's bloody tight. Like to know how you went?

Cheers

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...