Jump to content
SAU Community

Recommended Posts

all u can do to reduce it is get a resonator, unfortunately it reduces the loudness factor in of ur exaust in general it does get rid of the aweful resonance, i have a resonator off a V8 commodore, it has 0 restriction and has almost totally eliminated the noise, it pretty much only does it when the car is cold now. On the plus side it gave the care really really deep note.

  • 2 weeks later...

This noise got me defected yesterday, i knew it would happen, i was surprised i lasted this long with the noise. I might investigate into a full catback system now.

A v8 resonator hey??, might request for that aswell, i am over huge noise, im all for performance now.....as much as my na will provide anyway. Start with cat back, move onto cat, then incomes the extractors.

yep, they reckon they use it on the newer v8 commies and fords, he gave it too me for free cause he felt sorry for charging me for a new cat and it didnt even fix tghe problem, or if they know about it, ask for the resonator they use on twin cam corollas apparently these work even better.

  • 2 years later...

My car does this as well, did it with stock exhaust and still does it with 2.5" cat back exhaust with TRUST stainless steel muffler (no resonators or additional mufflers).

As others have said seems to be worse when the car is cold, pisses me off cause I rev real slow leaving my street and it makes the noise around 2500rpm, sometimes I shift as soon as I hear the noise start cause I think it sounds sh*t.

Only ever does it around 2500rpm-3000rpm never high in the rev range.

Took it to exhaust shop the other day who installed my cat-back but he had NFI what it would be. He got under the car while I revved it but it didnt make the noise (I think it only does it when the car is under load).

It's embarressing when it makes that horrible noise!

Do you think it's worth getting a resonator put in?

I have no idea what this "noise" is, I'm going to try upload a sound file of my gts, tell me if this "noise" is there...

hmmm the file is 40mb lol... How can I make it smaller.. it's a video and soun file.. you don't really need to see the video part tho...

Putting a decent resonator on your system eliminates it completely and as NA_33 said, although it becomes a bit quieter it sounds much deeper. I can relate to what all of you guys are saying, it kicks in around 2500/3000 rpm and makes an awful crackling/vibrating noise. I to was embaressed changing gears b/c the sound was that awful! Trust me, all you need is to put a good resonator in the piping, you'll be thankful.

  • 3 weeks later...

I know its an old thread but if anyone is reading Id highly suggest a resonator. A single muffer and cat will always sound awful on an NA car, a good muffler with a good quality resonator will really bring out the awesome note with out the horrible raspy/cackly noise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...