Jump to content
SAU Community

R34 Gtr Power Output?

mass_iv

By mass_iv,
in Engines & Forced Induction

 Share

Recommended Posts

mass_iv Grand Master

mass_iv

Posted
Posted

Hi Guys,

Need a bit of help on fuel pump setup..

I dont want to go surge tank so im looking for an intank pump that will be able to flow enough to pump out 350awkw roughly

will a bosch 023 do it?

Iv got all supporting mods, nismo FPR and sard 800cc injectors.

Opinions please? would rather hear from guys who have setups making this kind of power and what they used to get there.. Ideally i want to go more then 350awkw however i think that will require a turbo upgrade again...

Thanks

Mass

Link to comment
https://www.sau.com.au/forums/topic/267715-r34-gtr-power-output/
Share on other sites
mass_iv Grand Master

mass_iv

Posted
  • Author
Posted

yeh iv already got the FPR from previous mods, now upgrading the injectors hence why i have an fpr and 800cc inj....

I was just a little hesitant with using the 044 intank.. Iv decided to drop in the 044, and yes iv got the -5's so im looking at pumping out 350.

One more question for those that know,

What do the stock AFM's run out of puff at?

Do i need to go for Z32's? i was looking at getting them but unsure as to wat the stockies flow awkw wise????

Bakes Mentor

Bakes

Posted
Posted

What boost are you gonna run Mass? Your still on stock internals like me, correct?

My set up is similar to yours but with different ECU. Ive got ~300AWKW at 1.2 Bar.

Im far from an expert but in the research I did, most people with 350AWKW upgraded their air flow metres to Z32s

femno Grand Master

femno

Posted
Posted

I bet its at least x3 the cost of the 044.

I made 326 on 17psi with standard afms...you will require about 20psi to make 350odd, so depending on your tuner the afms may need upgrading.

I have a single Z32 afm and did make 380. Dont know how the tuner did it but he did...its all in the tune!!

mass_iv Grand Master

mass_iv

Posted
  • Author
Posted

hey guys,

thanks for the input so far....

Not stock internals anymore... engine is currently stripped and being built... its having the full treatment, forged internals, cams and sump etc.....

i was looking at a pfc d jetro instead of the Z32's but i think i might play it safe and just go Z32's with the pfc iv already got...

Only other thing i need to look at now is coil packs... tossing up between JJR and Splitfires??? not sure on the differences?

boostED82 Collaborator

boostED82

Posted
Posted

Hey guys, just a question out of curiosity as I begin stage 1 mods, but what are most of you running, 80mm or 90mm exhausts on your GTR's? I have an R34 GTR Nur with the N1 engine etc. Does the extra size really make that much difference in power?

Cheers,

Ed

Piggaz Grand Master

Piggaz

Posted
Posted
Only other thing i need to look at now is coil packs... tossing up between JJR and Splitfires??? not sure on the differences?

Whats wrong with stock coil packs? Buy the HKS Twin Spark and you will have no issues!

mass_iv Grand Master

mass_iv

Posted
  • Author
Posted

Thanks guys....

As far as i know my coils are fine, not failing, but i dont want to throw it on the dyno up the boost and find its suffering coz of coils....

So i thought the JJR's are a good cheap alternative, however unsure on quality???

Dunno bout the HKS twin spark? wat is it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...