Jump to content
SAU Community

Recommended Posts

hey as stated i got an 33 gtst, its got hks sequential bov an hks mushroom filter..

it sucks quite loudly even when not accelerating much...as in just feel the car picking up speed an then take foot off an bov will sound...

not really what i want is it abnormal or just the way it is?

ide like to tone it down a bit so only can hear it at say 3000rpm

any suggestions would be sweet cheers

Link to comment
https://www.sau.com.au/forums/topic/268755-r33-gts-t-air-intake/
Share on other sites

hey as stated i got an 33 gtst, its got hks sequential bov an hks mushroom filter..

it sucks quite loudly even when not accelerating much...as in just feel the car picking up speed an then take foot off an bov will sound...

not really what i want is it abnormal or just the way it is?

ide like to tone it down a bit so only can hear it at say 3000rpm

any suggestions would be sweet cheers

hey man i got the same problem, i got a boost guage and even before boost i hear it sucking and it doses wen i let the accelerator,,dunno wats wrong?

The only way to really tone it down is to replace the factory airbox and put in a performance panel filter. Many guys are running this setup and are very happy with the results.

The factory airbox will dampen the induction noise unlike the open filter that you are currently using.

yeah gonna hav to replace my POd anyway, i just put in a fmic yesterday so im defective at the moment,, the intercooler makes a nice flutter tho :D ,, got a standard bov as well

  • 1 month later...

i had the same problem, loved the sound of the pod filter to start with but after a couple weeks it got irritating. I changed it back to the factory air box but the snorkel wont fit over the intercooler pipe (still tyring to find a simple way around this)

love the sound of no pod though, can hear the turbo spinning which is much better than the sucking from the pod.

i noticed a big difference when i chucked in my FMIC and pod....the induction noise was definitely louder...now i have found its pretty simple..when accelerating dont hit any vacuum lol as i have blocked off my stock BOV it would flutter even with the slightest of vacuum....apart from putting the stock airbox back in there is nothing you would be able to do rather then with your right foot to stop the induction noise

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...