Jump to content
SAU Community

Recommended Posts

I did a search and couldn't see anything on this.

My car is an R32 running HKS 2530 at 1.3 bar. I have a fairly choked exhaust with the stock dumps and front pipe. Power is basically unknown, it is pretty quick. I have a dyno of ~260awkw on the supposedly low reading Ultimate Tunes dyno prior to replacing my cat. Is it true that this dyno reads low and by how much approximately? I'd appreciate comments on this...

My car will come onto boost quite hard in 2nd and smoke the tyres up to high 7k rpm. Dramatic, but not the fastest way of forward movement. I drive like a Granny 98% of the time but I like to give it a little hit now and then and wouldn't expect this in 2nd, nor is it especially legal and very hard to avoid. :P We all know the amount of coppers around Canberra!!!

I replaced the shit Nexens it had on it, with them the car would literally smoke all 4 at 100km/h. I figured it had to be the poor and balding tyres. I fitted 255/40/17 Toyo T1Rs to the TE37s all around which I've put several hundred kms on. It's slightly better but in second gear it's still hopeless, straight line is spins the wheels after 4500rpm.

Suspension is Bilstein shocks and unknown springs all around, with some changes to arms etc. as it came from Japan. The spring rates are of course stiff, but not overly so. The ride is quite compliant (certainly compared to a mate's WRX anyway). Camber is negative, but again nothing silly.

My question is, WTF? How can a 4WD car with the same tyres struggle for grip when a mate's S8 RX7 (he runs a ported block + T04Z at 1.1 bar around 280rwkw) with the exact same tyres (basically the reason I bought them) have full grip?

Is there a certain set up that can cause this behaviour? It's got me beat. :) Can any one here suggest a suspension place that can to look at this set up to aid traction?

Link to comment
https://www.sau.com.au/forums/topic/269211-r32-gtr-traction-issues/
Share on other sites

My question is, WTF? How can a 4WD car with the same tyres struggle for grip when a mate's S8 RX7 (he runs a ported block + T04Z at 1.1 bar around 280rwkw) with the exact same tyres (basically the reason I bought them) have full grip?

Is there a certain set up that can cause this behaviour? It's got me beat. :down: Can any one here suggest a suspension place that can to look at this set up to aid traction?

My GTR makes about the same power with similar turbo's and boost on the same dyno. I beleive the dyno is not "low" reading, just more truthful then some others.

I currently have some really crappy tyres on the 17's and I do not have any problems with wheel spin except if launching on boost. You obviously have some major set up problems or 4wd problems. You have not mentioned if your front wheels are receiving maxium torque. What does the dial say when you start wheel spinning?

For best drag style launching a softer rear end is the best for weight transfer, but at those power levels you should not need it. The tyres you have should be fine, but if you need better tyres on a budget try Federal 595RS-R's. Most swear by them here.

I hope that helps a bit.

For any suspension work go see Chris at Inline in Qbn.

Thanks I'll remember that. When I went past looking for tyres he had some nice cars there, a whole range including a R34 GTR.

My GTR makes about the same power with similar turbo's and boost on the same dyno. I beleive the dyno is not "low" reading, just more truthful then some others.

I currently have some really crappy tyres on the 17's and I do not have any problems with wheel spin except if launching on boost. You obviously have some major set up problems or 4wd problems. You have not mentioned if your front wheels are receiving maxium torque. What does the dial say when you start wheel spinning?

For best drag style launching a softer rear end is the best for weight transfer, but at those power levels you should not need it. The tyres you have should be fine, but if you need better tyres on a budget try Federal 595RS-R's. Most swear by them here.

I hope that helps a bit.

You're probably right about the dyno. Some insane numbers relative to ours are in the RB26 turbo upgrade dyno thread, LOL.

It seems it's 4WD issues. I'll check the transfer case tomorrow. :down:

You mean attessa? That was a thought I had too. Mine stopped working once and I unintentionally fish tailed all the way down Gungahlin drive. A little funny but not my preferred driving style.

That fishtail is what I experience in 2nd and 3rd gear coming on boost. Exciting, fun, etc but not fast, LOL.

Don't mean to be facetious, but the younger generation seem to think that traction and "the right foot" are completely divorced from one another.

I would suggest a high performance driving course would go a long way to curing the traction problem.

While I don't think you are entirely wrong about a driving course, I think you're jumping the gun here. I have had my AWD fail (problem fixed now) and it's damn surprising/scary when it does.

His symptoms fit what happened in my case and are pretty unusual for a GTR.

And tell me, do you know this guy or how old he is?

Thanks Kat. LOL, not that I should have to justify my position on the internet FFS, but this is near my 30th car and I've owned from 550hp 1080kg RWDs to modified 440+ci V8s. I don't think the right foot is an issue in this case. A 4WD car with tyres like this should not do this, I shouldn't have to feather the throttle in this car in 2nd gear in a straight line, as pointed out by a20089. FYI Erol, I've been on the track in plenty of other cars and done an advanced course 7/8 years ago with Rick Bates when I was younger.

Please try not to apply prejudice without any knowledge of the car or driver. I guess Erol's comments are a case in point that Skyline is somewhat synonymous with 'young hoon'. A shame for the genuine enthusiasts that make up the vast majority of owners. The Today Tonight attitude is basically politically correct now days.

Well it's definitely not the transfer case, it's working perfectly. I'll bleed the ATTESA and get a place to look at my suspension set up and go from there. Thanks everyone.

definitely on the right track with bleeding the attessa but make sure you get hold of an R32 manual if you don't know how to use the pump to presure bleed the system, gravity bleed doesn't work. Trojan can do it for you if you need them to.

i've got some Trust front pipes that I want to shift if you're interested in uncorking it.

Edited by Scooby
Please try not to apply prejudice without any knowledge of the car or driver. I guess Erol's comments are a case in point that Skyline is somewhat synonymous with 'young hoon'. A shame for the genuine enthusiasts that make up the vast majority of owners. The Today Tonight attitude is basically politically correct now days.

I certainly don't relate Skyline to 'young hoon'

The statement below I do assosciate with 'hoon', regardless of age, stated experience, 4WD/2WD, Kw's etc.

That fishtail is what I experience in 2nd and 3rd gear coming on boost. Exciting, fun, etc but not fast, LOL.

Yeah I am a Today Tonight 'hoon', clearly shown with a light hearted explanation of what the car does moving up the revs. Sorry I don't fit in with your ideology. Criticise away.

Perhaps post something positive as a way to sell yourself and the Richardson Motorsport business? While I would assume you have a solid and loyal customer base, your 7 or 8 cynical and critical posts on here are doing you no favours. Or maybe it's just that you like to show people how you see the world?

Yeah I am a Today Tonight 'hoon', clearly shown with a light hearted explanation of what the car does moving up the revs. Sorry I don't fit in with your ideology. Criticise away.

There's several members here that seem to have a knack for door knocking god bothering, and can't decern a jovial post.

Good luck with the prob and let us know the outcome.

Is it still 'the right foot' if you are driving a left hand drive car? So tell me, if I was being paid 200K a year to drive a car around a track really fast...am I a hoon? So if someone says, I only live once so why not have fun rather then restrict the quality of my life with rules some old guy decided for me...am I a hoon? As far as im conserned, the speeds at which we go are slow. The only reason we have to go those speeds is because we are restricted to having to rely on one of the more weaker forces in this world, friction..and gravity will always find a way to trump friction.

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Soft suspension would cause a bigger weight transfer to the rear wheels (ie weigth) due to the forward momentum, like a motorbike. GTR's are a bit light in the rear end and with solid suspension they to can spin a very little bit.

But as I said not much of a problem at these power levels and good tyres.

Is it still 'the right foot' if you are driving a left hand drive car? So tell me, if I was being paid 200K a year to drive a car around a track really fast...am I a hoon? So if someone says, I only live once so why not have fun rather then restrict the quality of my life with rules some old guy decided for me...am I a hoon? As far as im conserned, the speeds at which we go are slow. The only reason we have to go those speeds is because we are restricted to having to rely on one of the more weaker forces in this world, friction..and gravity will always find a way to trump friction.

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Sorry it is still left foot if you're driving a LHD car, as the peddles remain the same. But I appreciate the comment. And concur with your further comments. :)

The suspension is hard, but as a20089 says not hard enough at these power levels particularly with these tyres to cause issues.

Soft suspension would cause a bigger weight transfer to the rear wheels (ie weigth) due to the forward momentum, like a motorbike. GTR's are a bit light in the rear end and with solid suspension they to can spin a very little bit.

Having been accused of being cynical, god bothering, and Today Tonight correctness, I am somewhat reluctant to dispell this 'urban myth'.

Weight transfer has nothing to do with soft or hard suspension springs or shocks.

Weight transfer in the acceleration/braking direction is governed by Centre of gravity height/wheelbase/G's acceleration.

Also, anti-squat geometry is designed to lift the car, causing an 'equal and opposite' reaction at the tyre, (ie more traction)

Physics has not changed since the earth was created.

Erol

Having been accused of being cynical, god bothering, and Today Tonight correctness, I am somewhat reluctant to dispell this 'urban myth'.

Weight transfer has nothing to do with soft or hard suspension springs or shocks.

Weight transfer in the acceleration/braking direction is governed by Centre of gravity height/wheelbase/G's acceleration.

Also, anti-squat geometry is designed to lift the car, causing an 'equal and opposite' reaction at the tyre, (ie more traction)

Physics has not changed since the earth was created.

Erol

your suspension settings are all about weight transfer in the sense that your allowing the weight to move around as is need to help provide more or less grip (less!!! ;) ) as your driving style and environment demands.

knee bones connected the turbo so to say

in the same token it will most likely be a combination of things that is causing the issue.

maybe age of tyre with slightly too much camber and stiffness and the tyres are cold and the alteza is playing up..... etc, etc

just guess's as i haven't seen it happen

but who cares anyway? your GTR does skids!!!! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...