Jump to content
SAU Community

Recommended Posts

I did a search and couldn't see anything on this.

My car is an R32 running HKS 2530 at 1.3 bar. I have a fairly choked exhaust with the stock dumps and front pipe. Power is basically unknown, it is pretty quick. I have a dyno of ~260awkw on the supposedly low reading Ultimate Tunes dyno prior to replacing my cat. Is it true that this dyno reads low and by how much approximately? I'd appreciate comments on this...

My car will come onto boost quite hard in 2nd and smoke the tyres up to high 7k rpm. Dramatic, but not the fastest way of forward movement. I drive like a Granny 98% of the time but I like to give it a little hit now and then and wouldn't expect this in 2nd, nor is it especially legal and very hard to avoid. :P We all know the amount of coppers around Canberra!!!

I replaced the shit Nexens it had on it, with them the car would literally smoke all 4 at 100km/h. I figured it had to be the poor and balding tyres. I fitted 255/40/17 Toyo T1Rs to the TE37s all around which I've put several hundred kms on. It's slightly better but in second gear it's still hopeless, straight line is spins the wheels after 4500rpm.

Suspension is Bilstein shocks and unknown springs all around, with some changes to arms etc. as it came from Japan. The spring rates are of course stiff, but not overly so. The ride is quite compliant (certainly compared to a mate's WRX anyway). Camber is negative, but again nothing silly.

My question is, WTF? How can a 4WD car with the same tyres struggle for grip when a mate's S8 RX7 (he runs a ported block + T04Z at 1.1 bar around 280rwkw) with the exact same tyres (basically the reason I bought them) have full grip?

Is there a certain set up that can cause this behaviour? It's got me beat. :) Can any one here suggest a suspension place that can to look at this set up to aid traction?

Link to comment
https://www.sau.com.au/forums/topic/269211-r32-gtr-traction-issues/
Share on other sites

My question is, WTF? How can a 4WD car with the same tyres struggle for grip when a mate's S8 RX7 (he runs a ported block + T04Z at 1.1 bar around 280rwkw) with the exact same tyres (basically the reason I bought them) have full grip?

Is there a certain set up that can cause this behaviour? It's got me beat. :down: Can any one here suggest a suspension place that can to look at this set up to aid traction?

My GTR makes about the same power with similar turbo's and boost on the same dyno. I beleive the dyno is not "low" reading, just more truthful then some others.

I currently have some really crappy tyres on the 17's and I do not have any problems with wheel spin except if launching on boost. You obviously have some major set up problems or 4wd problems. You have not mentioned if your front wheels are receiving maxium torque. What does the dial say when you start wheel spinning?

For best drag style launching a softer rear end is the best for weight transfer, but at those power levels you should not need it. The tyres you have should be fine, but if you need better tyres on a budget try Federal 595RS-R's. Most swear by them here.

I hope that helps a bit.

For any suspension work go see Chris at Inline in Qbn.

Thanks I'll remember that. When I went past looking for tyres he had some nice cars there, a whole range including a R34 GTR.

My GTR makes about the same power with similar turbo's and boost on the same dyno. I beleive the dyno is not "low" reading, just more truthful then some others.

I currently have some really crappy tyres on the 17's and I do not have any problems with wheel spin except if launching on boost. You obviously have some major set up problems or 4wd problems. You have not mentioned if your front wheels are receiving maxium torque. What does the dial say when you start wheel spinning?

For best drag style launching a softer rear end is the best for weight transfer, but at those power levels you should not need it. The tyres you have should be fine, but if you need better tyres on a budget try Federal 595RS-R's. Most swear by them here.

I hope that helps a bit.

You're probably right about the dyno. Some insane numbers relative to ours are in the RB26 turbo upgrade dyno thread, LOL.

It seems it's 4WD issues. I'll check the transfer case tomorrow. :down:

You mean attessa? That was a thought I had too. Mine stopped working once and I unintentionally fish tailed all the way down Gungahlin drive. A little funny but not my preferred driving style.

That fishtail is what I experience in 2nd and 3rd gear coming on boost. Exciting, fun, etc but not fast, LOL.

Don't mean to be facetious, but the younger generation seem to think that traction and "the right foot" are completely divorced from one another.

I would suggest a high performance driving course would go a long way to curing the traction problem.

While I don't think you are entirely wrong about a driving course, I think you're jumping the gun here. I have had my AWD fail (problem fixed now) and it's damn surprising/scary when it does.

His symptoms fit what happened in my case and are pretty unusual for a GTR.

And tell me, do you know this guy or how old he is?

Thanks Kat. LOL, not that I should have to justify my position on the internet FFS, but this is near my 30th car and I've owned from 550hp 1080kg RWDs to modified 440+ci V8s. I don't think the right foot is an issue in this case. A 4WD car with tyres like this should not do this, I shouldn't have to feather the throttle in this car in 2nd gear in a straight line, as pointed out by a20089. FYI Erol, I've been on the track in plenty of other cars and done an advanced course 7/8 years ago with Rick Bates when I was younger.

Please try not to apply prejudice without any knowledge of the car or driver. I guess Erol's comments are a case in point that Skyline is somewhat synonymous with 'young hoon'. A shame for the genuine enthusiasts that make up the vast majority of owners. The Today Tonight attitude is basically politically correct now days.

Well it's definitely not the transfer case, it's working perfectly. I'll bleed the ATTESA and get a place to look at my suspension set up and go from there. Thanks everyone.

definitely on the right track with bleeding the attessa but make sure you get hold of an R32 manual if you don't know how to use the pump to presure bleed the system, gravity bleed doesn't work. Trojan can do it for you if you need them to.

i've got some Trust front pipes that I want to shift if you're interested in uncorking it.

Edited by Scooby
Please try not to apply prejudice without any knowledge of the car or driver. I guess Erol's comments are a case in point that Skyline is somewhat synonymous with 'young hoon'. A shame for the genuine enthusiasts that make up the vast majority of owners. The Today Tonight attitude is basically politically correct now days.

I certainly don't relate Skyline to 'young hoon'

The statement below I do assosciate with 'hoon', regardless of age, stated experience, 4WD/2WD, Kw's etc.

That fishtail is what I experience in 2nd and 3rd gear coming on boost. Exciting, fun, etc but not fast, LOL.

Yeah I am a Today Tonight 'hoon', clearly shown with a light hearted explanation of what the car does moving up the revs. Sorry I don't fit in with your ideology. Criticise away.

Perhaps post something positive as a way to sell yourself and the Richardson Motorsport business? While I would assume you have a solid and loyal customer base, your 7 or 8 cynical and critical posts on here are doing you no favours. Or maybe it's just that you like to show people how you see the world?

Yeah I am a Today Tonight 'hoon', clearly shown with a light hearted explanation of what the car does moving up the revs. Sorry I don't fit in with your ideology. Criticise away.

There's several members here that seem to have a knack for door knocking god bothering, and can't decern a jovial post.

Good luck with the prob and let us know the outcome.

Is it still 'the right foot' if you are driving a left hand drive car? So tell me, if I was being paid 200K a year to drive a car around a track really fast...am I a hoon? So if someone says, I only live once so why not have fun rather then restrict the quality of my life with rules some old guy decided for me...am I a hoon? As far as im conserned, the speeds at which we go are slow. The only reason we have to go those speeds is because we are restricted to having to rely on one of the more weaker forces in this world, friction..and gravity will always find a way to trump friction.

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Soft suspension would cause a bigger weight transfer to the rear wheels (ie weigth) due to the forward momentum, like a motorbike. GTR's are a bit light in the rear end and with solid suspension they to can spin a very little bit.

But as I said not much of a problem at these power levels and good tyres.

Is it still 'the right foot' if you are driving a left hand drive car? So tell me, if I was being paid 200K a year to drive a car around a track really fast...am I a hoon? So if someone says, I only live once so why not have fun rather then restrict the quality of my life with rules some old guy decided for me...am I a hoon? As far as im conserned, the speeds at which we go are slow. The only reason we have to go those speeds is because we are restricted to having to rely on one of the more weaker forces in this world, friction..and gravity will always find a way to trump friction.

Talking of forces, could it be an option that not enough weight of the car is pushing on the rear wheels? If you have very soft suspension, it might be that the rear end is too light so rather then moving the car forwards it jumps it up slightly causing it wheel spin...I dunno only thinking out loud ><

Sorry it is still left foot if you're driving a LHD car, as the peddles remain the same. But I appreciate the comment. And concur with your further comments. :)

The suspension is hard, but as a20089 says not hard enough at these power levels particularly with these tyres to cause issues.

Soft suspension would cause a bigger weight transfer to the rear wheels (ie weigth) due to the forward momentum, like a motorbike. GTR's are a bit light in the rear end and with solid suspension they to can spin a very little bit.

Having been accused of being cynical, god bothering, and Today Tonight correctness, I am somewhat reluctant to dispell this 'urban myth'.

Weight transfer has nothing to do with soft or hard suspension springs or shocks.

Weight transfer in the acceleration/braking direction is governed by Centre of gravity height/wheelbase/G's acceleration.

Also, anti-squat geometry is designed to lift the car, causing an 'equal and opposite' reaction at the tyre, (ie more traction)

Physics has not changed since the earth was created.

Erol

Having been accused of being cynical, god bothering, and Today Tonight correctness, I am somewhat reluctant to dispell this 'urban myth'.

Weight transfer has nothing to do with soft or hard suspension springs or shocks.

Weight transfer in the acceleration/braking direction is governed by Centre of gravity height/wheelbase/G's acceleration.

Also, anti-squat geometry is designed to lift the car, causing an 'equal and opposite' reaction at the tyre, (ie more traction)

Physics has not changed since the earth was created.

Erol

your suspension settings are all about weight transfer in the sense that your allowing the weight to move around as is need to help provide more or less grip (less!!! ;) ) as your driving style and environment demands.

knee bones connected the turbo so to say

in the same token it will most likely be a combination of things that is causing the issue.

maybe age of tyre with slightly too much camber and stiffness and the tyres are cold and the alteza is playing up..... etc, etc

just guess's as i haven't seen it happen

but who cares anyway? your GTR does skids!!!! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...