Jump to content
SAU Community

Recommended Posts

Well the car is finally in my drive way - although it has to go back to the repairer and back to Manta for further work. Steve from Manta went over the car today and discovered 16 items that the repairer failed to fix/fit properly! :( So now the process starts again. Oh what joy... :D

Sounds like what i went through with my Skyline, me and Mark Tilbrook had a list of about 30 things wrong with mine when i got it back. Crash shop took it back for a few months till everything on the list was fixed, that included replacing the rad support panel with a brand new one from Nissan

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

UNFU@#N BELIEVABLE !!!!!!

Simple Spit it Hardcore at insurer

Get another repairer to fix the Lifetime Warrantied Work

How the Hell did you let this car get so Raped For crying out loud

Now im really Puzzled at how this sort of work is allowed to be performed by Workshops

We have all had dramas in the past ,though far out back yard work and waiting for How Long????

GRRRRRRRRR Totally useless Crash shop , should not be allowed to fix TAXIs let alone GTRs

So do we actually have any good photos of your car Writeoff???

if not i camn supply you with few hehe "cheeky Grin" :(

Today I wrote an email to the insurance company's National Claims Manager which I have copied and pasted below. Again I have used **** instead of naming the repairer and used [ ] where I have made edits.

"[insurer] Motor Vehicle Insurance

National Claims Manager

RE: Claim #xxxxxxxxx Nissan Skyline R32 GTR

Hi [name],

[Editted - unrelated to this claim]

Last Thursday I settled my account at **** and finally collected my Nissan Skyline R32 GTR. From there I drove it straight to Manta Racing in Richmond for an inspection and change of oils and filters. On Friday afternoon I settled the account with Manta and finally took possession of my vehicle. However it is far from finished!

Steve Cramp from Manta went over the work performed by **** and completed a report listing 16 faults. I have included a scan of this report and have listed them below: (Please note that I have reordered them so that relating items follow each other)

[Editted - see my post #40 on page 2 of this thread for the list]

To these I would add:

17. Despite the a/c & heater being switched off hot air is blowing into the cabin at all times.

18. The front headlights do not line up evenly with each other or the bonnet.

19. The rear right guard is slightly bent just above the tail-light.

20. The rear right wheel guard rubs on the new Kumho tyres when driving over mild bumps in the road and is already doing damage to the tyre. The front right wheel guard also rubs against the tyre but does not appear to be doing any damage at this point in time. Please note that I do not hold **** responsible for this as I was unaware that my previous guards had been rolled.

I have attached some photos displaying some of these faults.

After a discussion with Steve he stated that Manta can fix faults 1 – 13 and 16 & 17.

Faults 14, 15, 18 & 19 would need to be corrected by a crash repairer and fault 20 I can have corrected by the Mag Wheel & Tyre Centre for $92.50 per wheel. http://www.mwtc.com.au/

I have completely lost faith in ****.

Their lack of professionalism is evident by them being unable to find second hand Skyline parts and BBS wheels despite them being in the industry for 25 years. I found this information by looking in the Yellow Pages and using Google. They also failed to meet 5 deadlines which they set.

Their customer service has been appalling as evident by their refusal to respond to my repeated requests for them to acknowledge my emails, contact me and update me on the progress of my car.

The quality of their work is substandard as evident by the numerous faults listed above – especially numbers 1 & 10 which could have resulted in a serious accident if the wheel had come off and caused further injury to myself, other motorists and more claims for [insurer] to deal with.

Shortly after the accident occurred in June, 2008, [insurer] gave me the name of a repairer in Port Adelaide that is familiar with Nissan Skylines. I did not contact the repairer at the time due to the distance from my home which I now regret. I would be much more comfortable for the remaining repairs to take place there and have no further involvement with ****.

I sincerely hope these faults can be corrected as soon as possible and I can once again enjoy driving the car I had dreamed of owning since 1991.

Kind regards.

David"

Edited by writeoff

I just had a phone call from the insurance assessor who had never contacted me previously. He wants to come and see the car and look at some of these faults next Wednesday. It means another week of inactivity but at least it appears that someone is listening to my complaints.

Now I have to draft a letter to the organisations that link their name to the crash repair workshop. This is not a small back yard repairer. They have been in the industry for over 25 years and have a large workshop and the latest equipment. It was because the repairer is RAA, SGIC, CGU, Volvo & Lexus approved and has won multiple industry awards for quality of work and customer service that I went there in the first place. I feel justified in letting these places know about the quality of work and customer service that I received and hope that no-one else has to go through the same ordeal. Perhaps some of the insurance companies will re-evaluate their recommendation.

Edited by writeoff

THATS FKD

just a question dosnt it always blow hot air in till you hit the the cycle button on 32s climate control??? or is it actually full on blowing in?

like you hit it while its switched off, you know what im talking about yeah :D

Edited by Inline 6
  • 6 months later...

Well today - 18 months and 2 days after my crash - I finally collected my car, had it checked out, and it is fixed... properly this time!

Again I took the car to Manta Racing for Steve to examine the work of the 2nd crash repairer. The report came back positive with only 1 minor fault. Otherwise he said the 2nd crash repairer did a good job.

Finally I have my car back!

Of course next year I have to fight with the insurance company and 1st crash repairer to recover some of the thousands of $ I have spent getting reports and repairs done. This may still end up in court so I will only name the initial repairer via PM. But at least I have my car back. Hu-f**kin-ray!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...