Jump to content
SAU Community

Water-temp Readings On Power Fc

geraus

By geraus,
in Engines & Forced Induction

 Share

Recommended Posts

geraus Mentor

geraus

Posted
Posted

Hey guys, just wondering, the overnight i drove down to MT Macesondon on the high mountains and was just wondering, my water temp readings were wierd, i wasnt even thrashing it and my temp would go up to 103-106 and i didnt even put my foot down at all when im up high, but when i was driving down normally my temp would eventually drop.... its wierd... my car temp is wierd like its going up and down when i dont even thrash it? I have ordered an ISC radioator hopefully it would make a diffrence...

Also my coolant has been changed 1month ago...

Link to comment
https://www.sau.com.au/forums/topic/270501-water-temp-readings-on-power-fc/
Share on other sites
geraus Mentor

geraus

Posted
  • Author
Posted (edited)

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

Edited by geraus
r33cruiser Grand Master

r33cruiser

Posted
Posted (edited)

hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Edited by r33cruiser
TiTAN Grand Master

TiTAN

Posted
Posted
hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

there is no reason you need to run such a low temp thermostat in a street car combine that with a decent radiator and the thing will never be at propper operating temp.

gotRICE? Veteran

gotRICE?

Posted
Posted
hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Id also have to disagree.

They open at 78-81 for a reason.

All your going to do by putting in a cooler thermostat is not let the engine ever warm up properly. And thats not a good thing.

So what "gains" are you "reaping" exactly?

STATUS Grand Master

STATUS

Posted
Posted (edited)
cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

stick with a genuine nissan thermostat, i have had nearly 10 dud tridon ones supplied by customers even after trying to convince them otherwise. Now i refuse to fit anything other than genuine.

Check your clutch fan as it sounds like the clutch is giving out.

Edited by URAS
geraus Mentor

geraus

Posted
  • Author
Posted

Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

STATUS Grand Master

STATUS

Posted
Posted (edited)
Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

follow your bottom rad hose back to the engine, the thermostat is there.

bleeder is front right side of plenum.

post-34927-1242647961_thumb.jpg

Edited by URAS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...