Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering, the overnight i drove down to MT Macesondon on the high mountains and was just wondering, my water temp readings were wierd, i wasnt even thrashing it and my temp would go up to 103-106 and i didnt even put my foot down at all when im up high, but when i was driving down normally my temp would eventually drop.... its wierd... my car temp is wierd like its going up and down when i dont even thrash it? I have ordered an ISC radioator hopefully it would make a diffrence...

Also my coolant has been changed 1month ago...

Link to comment
https://www.sau.com.au/forums/topic/270501-water-temp-readings-on-power-fc/
Share on other sites

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

Edited by geraus

hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Edited by r33cruiser
hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

there is no reason you need to run such a low temp thermostat in a street car combine that with a decent radiator and the thing will never be at propper operating temp.

hm. i wouldnt go a genuine nissan thermostat. they dont open till 78-81C.

i would go a nismo 62C thermostat. reap the gains

http://justjap.com/store/product.php?produ...=271&page=4

Id also have to disagree.

They open at 78-81 for a reason.

All your going to do by putting in a cooler thermostat is not let the engine ever warm up properly. And thats not a good thing.

So what "gains" are you "reaping" exactly?

cool cool, thanks guys, Also just wondering, I ordered an ISC radiator of Ryan, Now before changing it, I would like to change my Thermostat as well, What type of thermo stat would i need to change it ? , just to a standard one or so.

Thanks,

Geraus.

stick with a genuine nissan thermostat, i have had nearly 10 dud tridon ones supplied by customers even after trying to convince them otherwise. Now i refuse to fit anything other than genuine.

Check your clutch fan as it sounds like the clutch is giving out.

Edited by URAS

Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

Ok cool, i'll have a look, thanks Trent.

I was looking at the engine bay before, I cannot seem to find the thermostat and the bleed valve... Here are some pictures, If anyone can let me know where it is in the picture , can you guys circle it in red?

dsc00119w.th.jpg

dsc00118x.th.jpg

follow your bottom rad hose back to the engine, the thermostat is there.

bleeder is front right side of plenum.

post-34927-1242647961_thumb.jpg

Edited by URAS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...