Jump to content
SAU Community

Recommended Posts

I decided against the coil packs that sit in the valley between the 2 cam shafts, so I made my own custome setup that works better and is much cheaper by using 3 holden commodore VT coil packs bought brand new for 45 dollars each and 6 igntion lead to suite required length came to a grand total of no more than 160 dollars after purchasing the mounting brackets.

110,000 thousand volts of pure electricity with a wasted spark mode for better fuel economy and the coil packs last longer and are cheaper and more readily available to purchase.

So think about that option as well I think it's a great idea works very well and I have been using it for 9 months now and not a drama and have increased power and fuel economy.

Splitfires ......... :devil: Get them. They are very good. This system replaces the original equipment coil pack and ignition wires with a direct ignition coil on plug system. The increased ignition performance found with the SplitFire Super Direct Ignition System is a must for all racing and performance enthusiasts.

I decided against the coil packs that sit in the valley between the 2 cam shafts, so I made my own custome setup that works better and is much cheaper by using 3 holden commodore VT coil packs bought brand new for 45 dollars each and 6 igntion lead to suite required length came to a grand total of no more than 160 dollars after purchasing the mounting brackets.

110,000 thousand volts of pure electricity with a wasted spark mode for better fuel economy and the coil packs last longer and are cheaper and more readily available to purchase.

So think about that option as well I think it's a great idea works very well and I have been using it for 9 months now and not a drama and have increased power and fuel economy.

i get these things in all the time and 9 times out of ten they are no better than stock.... in fact i just had a 4dr r32 in that would not crack over 15psi without closing the plugs down to .5mm.... it was using the AU setup. Best bet is new COPs or aftermarket COPS.

thats why wen my coils failed i bought a set of R34 GTR vspec coilpacks with under 40,000kms, and they work an absolute treat

ps. r33 series 2 and r34 gtr coilpacks are the same >_<

they might be hard to come by, but i found some almost straight away

cheers

Is it possible that these bigger coils need larger dwell time to charge up? I hooked up an oscilloscope the stock dwell time was only 1.8/2ms or something like that.

i get these things in all the time and 9 times out of ten they are no better than stock.... in fact i just had a 4dr r32 in that would not crack over 15psi without closing the plugs down to .5mm.... it was using the AU setup. Best bet is new COPs or aftermarket COPS.
  • 2 weeks later...
thanks everyone for your comments, obviously these are ok then, not a complete waste of time ...

regards

not at all. I have a had a set on my S1 R33 GTST for around 5 months now and they havent skipped a beat. They fixed my misfire issue instantly and Ive been giving em hell and they are strong as. Quite a few people are using these now and they are very happy. I got mine direct from paul at www.performance-wise.com and they also come with a 12 month warranty which as good as it gets with these products. I think there is a group buy for them here now on SAU aswell and theres also few good comments and info about these in the group buy thread aswell. Get em. You wont regret it and you'll have some change to get other mods :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...