Jump to content
SAU Community

Bov Question

4NTM4N

By 4NTM4N,
in Western Australia

 Share

Recommended Posts

KurtG Contributor

KurtG

Posted
Posted

haha this thread is interesting lots of different opinions . :closedeyes: But seriously the flutter sound is for PURE wank factor. Seen a guy in sydney city yesterday with the flutter on his r33 f**k it was loud and yes everyone which was walking turned around to look at the car i sure did heard the car a couple of streets away before it turned the corner. When you think about it all atmo BOV are for wank factor some more then others this is probably the 20th time i have seen a thread about BOV and everytime its the same shit.

syfon Veteran

syfon

Posted
Posted

Or you can do what i've done, you can take the gasket out of your BOV and replace it with a solid gasket (mine is cut out of tin), drill teh holes and put it in there....BOV is completely closed off and forces turbo flutter the proper way :P lol

syfon Veteran

syfon

Posted
Posted
For f**ks sake man....

Yes you can put a piece of aluminium can in between the flange connection if you want, so that the air returns back through the turbo just to create a bit of noise.

I can also drive my car off a cliff if I wanted to, but it doesn't make it a good idea. That's my point, I don't give a f**k what you do to your car, but I'd like people to show just a bit of common sense if they are thinking about doing something with a negative impact.

LOL dude just relax, someone was asking a question, no need to get worked up. I have my stock BOV blocked off simply so i get turbo flutter, it may or may not damage my turbo, i am not sure.

However, turbo flutter is personal choice. I personally like the sound of turbo flutter, you may not. It's personal taste!

So just take a chill pill mannnggggg

ossie_21 Grand Master

ossie_21

Posted
Posted
HAHAHA settle down ey no need to get so fired up i didnt say i wanted to do it i CLEARLY asked if it was a good idea or not...and now i know..cheers

+ get over your big expensive turbo!!

Erm yeah, cos I'm totally in love with it hey, I love talking it up at every opportunity

/sarcasm

I was just making the point that even by not blocking my bov off I get the flutter, and that is due to the size of it. On larger turbos with bigger compressor wheels they might have the same effect too, but it sounds a lot different to the flutter on a blocked bov running less boost. All I was doing was suggesting you don't do it, but like I said I don't give a f**k what you do to your car because it's your choice.

so flutter is gay... EXCEPT if its YOUR bigger turbo? :D

and if its slowing the turbo down, and damaging it like you claim, why do you let yours do it? :blink:

What the f**k is wrong with you?? Read my replies properly & actually think about it if you really want to attack every one I make to make yourself seem cool. Do that, and you would realise I am talking about completely blocking off the bov, the flutter you get from that, especially when you are running a relatively low boost level. The flutter my car makes isn't all the air going back through, just some of it that isn't really avoidable. In other words purely for the hope you now understand, it's not enough air going back through for me to consider it a dangerous level.

LOL dude just relax, someone was asking a question, no need to get worked up. I have my stock BOV blocked off simply so i get turbo flutter, it may or may not damage my turbo, i am not sure.

However, turbo flutter is personal choice. I personally like the sound of turbo flutter, you may not. It's personal taste!

So just take a chill pill mannnggggg

Yeah they asked the question so I gave my opinion, of which plenty of people agree with. I agree it is down to personal choice, but I'm only letting people know that it's not really worth it. You do know this is a forum in which peoples opinions are discussed about different topics right? I hardly call that getting worked up :)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...