Jump to content
SAU Community

Recommended Posts

  • Replies 159
  • Created
  • Last Reply

Top Posters In This Topic

Hahaha, He might just do! she seemed to have an interest in silly wogs :banana:

on another note, my friend is bummy with gms. might get him to give them a hola to get the m35 ecu

"The fully sik Stageas were live revving and revving hard, then the Skinny Stagea (250t) said to the fat Stagea (260RS), I'm gunna get my aftermarket homies on to you and then a Chik Chik backfire . . Boom. . . it was all over. . . .the poor skinny stagea had a broken nose. . "

which in plain english = not worth fixing. now if a import panel shop got the car for nix and fixed it thats another story.

how did you find this out?

I work for the Insurance company as an assessor. and have looked a car

Mind you that the replacement parts would all be NEW from nissan. or whoever made the kit that was on the car.. + all the broken parts that you can see. airbox etc etc..

thats why the cost will be out of this world.. it really doesnt look like that much of a knock. but the rail does look like it took most of the impact.

The price was using used parts 1/2 from a importer when dose a insurance companay pay for new parts on a old car? the rail is very bad, only new parts would be air bags and suspension.

I work for the Insurance company as an assessor. and have looked a car

do you mean THIS car??

The price was using used parts 1/2 from a importer when dose a insurance companay pay for new parts on a old car? the rail is very bad, only new parts would be air bags and suspension.

if youve looked at it, then youd know it doesnt need airbags replaced as they werent deployed.

depends on the insurance company if they use new or 2nd hand parts. i think AAMI dont use new parts if the car is more than a year old. dont quote me on that.

I work for the Insurance company as an assessor. and have looked a car

The price was using used parts 1/2 from a importer when dose a insurance companay pay for new parts on a old car? the rail is very bad, only new parts would be air bags and suspension.

brian walker? who do you work for?

do you mean THIS car??

if youve looked at it, then youd know it doesnt need airbags replaced as they werent deployed.

depends on the insurance company if they use new or 2nd hand parts. i think AAMI dont use new parts if the car is more than a year old. dont quote me on that.

Sorry i look at so many cars every day, and this went threw over 2 months ago, must of been the other one we had that the bags had gone off on, but yes i have seen this car and needs a new rail and with a big repair on the fire wall.

As long as the car is under factory warranty they should use new parts, on cars out of warrany aftermarket or used parts can be used can be used only safty item have to be new, eg air bags.

brian walker? who do you work for?

I work for Just Car Insurance as an assessor in Sydney.

i almost thought you didnt speak english with your first post :D

this one clears things up a little!!

ahh yes i didnt think of factory warranty. however, i know ALL insurance companies dont do that. my friends car was stolen and beaten up. they used 2nd hand parts to repair and now she is having problems with a warranty claim because of 2nd hand parts.........

Ah no worries, the only brian my brother knew was brian walker.. i guess not you..

as an example for everyone

cars insured for 20g, Brian quotes 15k to fix, Auction assessor say they will get 5k @ auction the car will get written off and sold..

the values will obviously be a little different Brian may be able to explain more..

Ah no worries, the only brian my brother knew was brian walker.. i guess not you..

as an example for everyone

cars insured for 20g, Brian quotes 15k to fix, Auction assessor say they will get 5k @ auction the car will get written off and sold..

the values will obviously be a little different Brian may be able to explain more..

Spot on there. and the problem is with some people paying silly money for damaged imports like skylines and Evo's we can total loss the car easy. I can check up but im sure someone paid around $7000 for this black Stages threw pickles.

Yeah i think it went somewhere around 7k..

i'm also taking a stab and saying you ring around a few of the bigger jap wreckers for parts to fix? and will average the prices if you can locate... i'd say a m35 stagea would be a tricky one to locate panels etc for..

Yeah i think it went somewhere around 7k..

i'm also taking a stab and saying you ring around a few of the bigger jap wreckers for parts to fix? and will average the prices if you can locate... i'd say a m35 stagea would be a tricky one to locate panels etc for..

There was a quote done on the car by Prestige Motorsport in Sydney who priced up a front cut less motor out of Japan with all labour req and still come in well over $15000, for people who dont know Prestige Motorsport is a smash repair - importer in Lansvale Sydney he will import any parts needed, brings parts over for Just Cars all the time. and fixs alot of the imports.

I think he still has a S2 Stagea front cut sitting around, and im sure he will bring in M35 parts if there are people after stuff.

Without seeing the car in person it does not look that bad. $3500 I thought would be on the money for a full front cut less mechanical. I have done over 6-7 similar cars in the past and never spent that much on a front cut. They were all jap cars. The high repair bill be for alot of labour dropping motor and gearbox, stripping engine bay, removing full dash to repair fire wall, painting inside were welding new rail to fire wall etc. If you were a back yarder and did all this donkey work yourself, like I use to, I would guess/estimate work needed to be done by a panel builder and painter to be $3000-4000 plus parts.

Speaking of parts, what ever happened to the 2 2004 stagea's that could not be complied. Surly someone is stripping them, 2 perfect fronts on them

Without seeing the car in person it does not look that bad. $3500 I thought would be on the money for a full front cut less mechanical. I have done over 6-7 similar cars in the past and never spent that much on a front cut. They were all jap cars. The high repair bill be for alot of labour dropping motor and gearbox, stripping engine bay, removing full dash to repair fire wall, painting inside were welding new rail to fire wall etc. If you were a back yarder and did all this donkey work yourself, like I use to, I would guess/estimate work needed to be done by a panel builder and painter to be $3000-4000 plus parts.

Speaking of parts, what ever happened to the 2 2004 stagea's that could not be complied. Surly someone is stripping them, 2 perfect fronts on them

The backyard repairer/own your own workshop are the guys who can do it on the cheap :) there are surely some good buys at auction if you are one of these guys.

i would buy some of the evo's and fix them! they seem cheap tho can be pretty damaged with a small knock.

speaking of smashed repair jobs..

http://www.pickles.com.au/damaged/vehicle/...0020554/lotid-0

looks like my brother did end up getting the r34 he was calling me about..

What do you know about this car?

I saw it just over a week ago at a panel beater near my work. They had the front stripped to quote. They do all the high end $300K plus cars

I have a spare $160K at the moment, stuff the house reno's. It goes to auction on the 24th. I think I might have a look. . .

I just checked, it is listed in the storm/flood affected vehicles

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...