Jump to content
SAU Community

Recommended Posts

i'm with Shannons

they were cheaper by far, full comp for 1600 insured for 13500 was cheaper but i added 3k, they never asked about garage (i have one anyway). They also said the market value was 18500, does this sound right? 96 S2 R33 GTS-t

I've been with JC for my last 3 cars incl. my current R34 and when renewing my insurance they wanted to drop the agreed value $2k or so and I told them not good enough, so I got a call back and they were happy to leave it at the previous insured value ($22k iirc) because I've been with them for a while (and even though I made a big claim on a previous car) so I'm pretty happy with JC, they haven't screwed me over *yet*.

I rang them and told them if there going to drop the agreed value then i will go elsewhere, they said there was nothing they could do about it.

i'm with Shannons

they were cheaper by far, full comp for 1600 insured for 13500 was cheaper but i added 3k, they never asked about garage (i have one anyway). They also said the market value was 18500, does this sound right? 96 S2 R33 GTS-t

That sounds way too high, if my S1 has a market value of $12500 i cant see a S2 being $6000 more expensive.

The hunt continues...

I've just applied to Famous for a quote.

Can't say I like the sound of Just Cars low market values and mega excesses though... They're premium came out nicely at $1250 or so though.

Market value of my 1999 R34 GTT through LSV is $26k (down from $30k)

  • 3 months later...

hm just spoke to shannons and they wanted almost $1,000 MORE than JC ... and JC have just upped my premium a couple hundred to $1900 and lowered agreed value $2k at the same time (to 23k)

Looks like there's no one that can beat JC .. hopefully when I turn 30 next year maybe they take some pitty on this old fool and give me a better rate than this :)

im with shannons have been the last 3 yrs . i pay under a grand a yr series 1 r33 agreed value at 18 g and 500 bucks exess if it gets stolen . the joys of been a old fart lower premuins

i have never had to claim with them so i cant comment on that side of things i pay monthly im rapt with them so far ..

oh they are a bunch of 2 faced scammers, cynically feeding off their go-ggo image.

try a claim with them (up until about 12-18 months ago things were great). now days they have been taken over by suncorp, standards and attitudes in management have changed...and we are about to lodge our complaint with the industry ombudsman.

I'm sure Kel will be happy to elabourate though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...