Jump to content
SAU Community

Recommended Posts

Full on FIA GT rules with 3 classes of power to weight.

GTA min of 2.7Kg/Hp

GTB min of 3.7Kg/Hp

GTC min of 4.7Kg/Hp

40 minute mini enduro races with mandarory pits stop of driver change or refuel.

Performance box data recorder for checking power out put.

open to all but GT1 cars, but sportsedans i have arrange to slip under the radar and can be used LOL

ohh i ample BB, have you been peeking in the showers again !

I have options i suppose.

Sad old R32 wide body Skyline RB26/30 running the GPC class.

S1 Lotus exige with K20 Honda conversion in GPB class. Being built as we speak.

S1 Lotus exige with turbo honda conversion in GPA class.

Or Sportsedan with F3$% off V8 engine, clunky old 4 speed gearbox and a quickchange diff

Just for interest we are going to develop this body kit a bit more so its sits lower to the surface and flat bottom the old car. Also ordered or going to as soon as i work out what the difference in oil picks up are, a RIPS RB26/30 bottom end and a stocko too.

Seems the garage these days is knocking out body kits for lots of different cars you should see the EVO currently under development. Might be able to find a link to show you

post-28646-1243250348_thumb.jpg

Support race i dont think that would be a possiblity. But they are talking about getting our cars down there before the F1 to give the circuit a pounding to see if there are any issues before the F1 race Snowy.

At this point there is talk of hold some of our race meeting there but thats yet to be confirmed.

Sad sad day!

Seems that the skyline will be commited to trackdays from here on it. I just cant see a way i could get it to compete with what is on the way for our next race season. The heat here just kills the FI cars. Dont think i could bring myself to sell it but will cross that bridge if and when. Will put it online and see if some one is keen enough to campain it again.

Not sure if i will be allowed back on the site but my business partner and i have ( tomorrow ) purchased a GT3 viper to race in the GTA class and the Lotus exige ( with K20 honda conversion ) for the endurance racing and GTB class if we feel like doing 45 minutes each.

very sorry to hear that, you've probably done more races in a skyline than anyone on here. but in the end racing's about competing, there is no reason to run around on your own at the back :D

the viper and exige will be a real step up, more reliable, and probably cheaper over time

Hey Duncan,

Had a change of heart we are rebuilding the engine for the old girl as i got her apart last weekend on a 2 day trip backto dubai from Joburg.....was only 47 degrees and pulling a rb26 out of a GTR i need medical help i reckon.

Anyway i am going to finish what i started and get engine back together, needs crank rods etc etc. Then fit the wide body kit and then let the engine tuner run it in the GTC class, which seems we can get the old girl down to that power to weight. Had some thoughts on a new look for the oldgirl. Yes the viper will be on a different plant but i think the skyline will always be a favorite, and not just me i have lots of people telling me i have to run it again LOL quite clearly thesepeople dont know what it takes to keep a GTR running

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...