Jump to content
SAU Community

Recommended Posts

Full on FIA GT rules with 3 classes of power to weight.

GTA min of 2.7Kg/Hp

GTB min of 3.7Kg/Hp

GTC min of 4.7Kg/Hp

40 minute mini enduro races with mandarory pits stop of driver change or refuel.

Performance box data recorder for checking power out put.

open to all but GT1 cars, but sportsedans i have arrange to slip under the radar and can be used LOL

ohh i ample BB, have you been peeking in the showers again !

I have options i suppose.

Sad old R32 wide body Skyline RB26/30 running the GPC class.

S1 Lotus exige with K20 Honda conversion in GPB class. Being built as we speak.

S1 Lotus exige with turbo honda conversion in GPA class.

Or Sportsedan with F3$% off V8 engine, clunky old 4 speed gearbox and a quickchange diff

Just for interest we are going to develop this body kit a bit more so its sits lower to the surface and flat bottom the old car. Also ordered or going to as soon as i work out what the difference in oil picks up are, a RIPS RB26/30 bottom end and a stocko too.

Seems the garage these days is knocking out body kits for lots of different cars you should see the EVO currently under development. Might be able to find a link to show you

post-28646-1243250348_thumb.jpg

Support race i dont think that would be a possiblity. But they are talking about getting our cars down there before the F1 to give the circuit a pounding to see if there are any issues before the F1 race Snowy.

At this point there is talk of hold some of our race meeting there but thats yet to be confirmed.

Sad sad day!

Seems that the skyline will be commited to trackdays from here on it. I just cant see a way i could get it to compete with what is on the way for our next race season. The heat here just kills the FI cars. Dont think i could bring myself to sell it but will cross that bridge if and when. Will put it online and see if some one is keen enough to campain it again.

Not sure if i will be allowed back on the site but my business partner and i have ( tomorrow ) purchased a GT3 viper to race in the GTA class and the Lotus exige ( with K20 honda conversion ) for the endurance racing and GTB class if we feel like doing 45 minutes each.

very sorry to hear that, you've probably done more races in a skyline than anyone on here. but in the end racing's about competing, there is no reason to run around on your own at the back :D

the viper and exige will be a real step up, more reliable, and probably cheaper over time

Hey Duncan,

Had a change of heart we are rebuilding the engine for the old girl as i got her apart last weekend on a 2 day trip backto dubai from Joburg.....was only 47 degrees and pulling a rb26 out of a GTR i need medical help i reckon.

Anyway i am going to finish what i started and get engine back together, needs crank rods etc etc. Then fit the wide body kit and then let the engine tuner run it in the GTC class, which seems we can get the old girl down to that power to weight. Had some thoughts on a new look for the oldgirl. Yes the viper will be on a different plant but i think the skyline will always be a favorite, and not just me i have lots of people telling me i have to run it again LOL quite clearly thesepeople dont know what it takes to keep a GTR running

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...