Jump to content
SAU Community

Recommended Posts

Yeh I heard about this the other day!

MAKES YOU PUKE!

I believe that each establishment has to stay on this list for a full 12 months!

I even got sick at.... 'er maybe I shouldn't say what 5 Star establishment it was!

Yeh it is disgusting, On sunday night we went out for a bit of a drive and out of luck I meet Smokey from here, small world, well we went to maccas just after the airport tunnel, a few of the guys were hungry and my mates cousin had a double quarter pounder and 10 nuggets, bad move he was in St George hospital since that night,he got out this morning- he had severe food poisoning.

Is this new news??? always a risk eating food someone else has prepared....

Good to see my regular restraunts arn't on the list, (in the last 12 months)

good to see that the food authority is looking into restaurants etc, i was sick a dog for a few days after having an oporto's burger from parra westfeild, and i love oporto's but dont eat it anymore, i dont wanna get sick from chicken again happened once at oporto's and once at kfc, no more fast food chicken for me

Is this new news??? always a risk eating food someone else has prepared....

Good to see my regular restraunts arn't on the list, (in the last 12 months)

Yeah, but every licensed food establishment has a "DUTY OF CARE" NOT TO 'POISON PPL'

Being in the food industry im all for this list only thing i dont like is it dosnt list the offence of the business eg there is a dominos on there 5 times so thats five different violations they could be serrious (pest problems\rotten food) or minor (food not wrapt properly\ not stored in correct position on shelf) which i think is a very important part and should be included if the business is to be shamed shouldnt we know wat were shaming them for exactly?

My stomach has grown a resistance to this kind of thing from constantly eating food thats being prepared with 1/2 arsed to no hygiene in mind & drinking tap water thats not really "safe" during my childhood years in China.

Good times, good times :(

Being in the food industry im all for this list only thing i dont like is it dosnt list the offence of the business eg there is a dominos on there 5 times so thats five different violations they could be serrious (pest problems\rotten food) or minor (food not wrapt properly\ not stored in correct position on shelf) which i think is a very important part and should be included if the business is to be shamed shouldnt we know wat were shaming them for exactly?

RATS!

One of the SAU dinner favourites gets a mention :laugh:
Nature & circumstances of alleged offence

Fail to maintain at or near each hand washing facility a supply of soap and single use hand towels or other means of effectively drying hands

Meh... That's nothing...

It's all good :ninja:

Yeh it is disgusting, On sunday night we went out for a bit of a drive and out of luck I meet Smokey from here, small world, well we went to maccas just after the airport tunnel, a few of the guys were hungry and my mates cousin had a double quarter pounder and 10 nuggets, bad move he was in St George hospital since that night,he got out this morning- he had severe food poisoning.

i hope he is going to follow it up legally?

We told him the same thing , apparently that maccas was closed the next day, they were repairing the grill.

I ts sucks to say but What way can you prove that the burger made him sick? its just a waste of time and money perusing things like that especially if its such a big corporation

most of them are minor offences like no thermometre in fridge, no paper towels in direct vicinity to wash basin.... the indian, chinese and middle eastern restauraunts are bloody dirty places (rats/cockroaches), there will always be cockroaches where food is prepaired in large numbers but looks like these places dont even bother to try and kill the critters....

good most thai places are decent lol

alittle bit of food poisoning only makes you stronger, just make sure you have your hep b and c vaccinations first lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...