Jump to content
SAU Community

Car Wobbles/shakes When Taking Off In Cold Weather

Rekin
 Share

Recommended Posts

Rekin Grand Master

Rekin

Posted
Posted

Hey,

Recently on cold mornings when i first drive the car. When i move off in First gear, the car starts to wobble/shake during the clutch pedal release. Once im off the clutch the car is fine. When i change through gears its fine. If i come to a stop at lights again and take off in first, the car again starts to wobble/shake as i slip the clutch to take off.

Once ive driven for 5 minutes etc the problem never occurs and never happens during the day. Only happens when I first drive the car in the morning.

It also happens when reversing from driveway slowly, the car begins to wobble/shake and need to get off the clutch to stop it.

This problem used to happen with my old standard clutch and replaced it with exedy h/d clutch. Now, after driving with the clutch for the past 1yr the problem is slowly coming back...

Im not sure if its clutch related, flywheel related etc

Anyone know what the problem is? Is it oil or something dripping on clutch overnight causing it to slip and cause the weird side to side wobble the car has in the morning?

Any help would be great :)

Thanks

White GTS-T Mentor

White GTS-T

Posted
Posted

I had a similar problem, but I just put it down to having a 5 puk and a 2-way. But on the weekend I changed my clutch fluid, and it has made a significant difference. Before i changed the fluid the clutch seemed to be either 'in' or 'out', but now the pedal feel is a lot more gradual and has made taking off a lot smoother. I'd be giving this a try first and see if it helps.

  • 4 weeks later...
Birds Grand Master

Birds

Posted
Posted

Silly question perhaps, but are you people giving your engines enough RPM in the morning? Cold clutches + cold engines at low RPM typically result in this. Always a good idea to slip the clutch with plenty of RPM on a cold morning to get some friction happening.

myRB25DETT Community Regular

myRB25DETT

Posted
Posted
Silly question perhaps, but are you people giving your engines enough RPM in the morning? Cold clutches + cold engines at low RPM typically result in this. Always a good idea to slip the clutch with plenty of RPM on a cold morning to get some friction happening.

+1 ....in my case, every morning, leave the car warmed up say at least 5 mins. and rev it up a bit and bang probs solve...my car always shakes if i dont warm it up for a bit early in the morning ..so maybe it works for me...

SDEWY5 Community Regular

SDEWY5

Posted
Posted

Have had this problem twice and its only raised its head when the clutch has copped a thrashing, overheats and then it struggles to grab for up to a week after its been thrashed, both on different exedy heavy duties, one 6 puck and one 5 puck. Throw it out and get something better i reckon. Putting a HKS twin plate in mine now.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...