Jump to content
SAU Community

Help Please, Can Someone Please Lend Rb26 Coil Pack Module?...


Recommended Posts

I'm hoping someone in Vic might have a coil pack resistor for an RB26 that I can borrow for 5 mins. The R is running on 5 cylinders atm.

Basically, i've narrowed it down to cylinder no 6 (unplug the lead to the coil pack and it idles/runs the same). I've changed the spark plugs (no change), bought new splitfires (no change, dammit!) and its still not right. Running a test light to the lead to no 6 coilpack it is getting power, but wouldnt register the triggering signal (terminal E on coilpack). So the way i figure it, it should be the module, or the coil pack wiring loom. It went from running perfectly when i parked it, to running on 5 the next time i started it (2 weeks later) and the only thing i did was disconnect/reconnect the battery in between.

I'm hoping someone can lend me one, plug it in for 2 seconds, if it runs on 6 cylinders i'll then go looking for one a wreckers and i've solved my dramas. I cant afford to buy one at a wrecker and for it to not fix the problem. Funds are too low to keep splashing cash.

If you can help at all it would appreciated.

Cheers

post-16627-1243945077_thumb.jpg

Did you test for continuity from the ignitor plug to the coilpack plug in the coilpack loom?

No I haven't, how do I check that? I'm a beginner at this sort of stuff.

Yeah RB20 one will be the same.

I have no idea whether E or (-) is the trigger (my guess would be (E)), but one of those should run to one of the wires at the front side of the ignitor. So just go through all 12 combinations with everything disconnected.

If you dont have continuity through one of the wires then theres a prob with the loom. If you do have continuity its either the ignitor, ECU loom, or ECU.

Thanks Mat, got a multi meter from one of the guys at work so i'll take a crack at it this weekend.

I've got an RB20 ignitor box but it doesnt look the same, if the connectors plug in do you do reckon its safe to give it a crack? I dont want to fry anything...

the part number you need is 22020-05U00 most likely the rb20 one will have a part number of 22020-05U10 but by the look of nissan fast some later model rd20det's came with the gtr module so you might get lucky, i would not use anything but the U00 one.

Spent the last hour or so with the multi meter on the GTR.

There was continuity on all the wires on the loom from the module to the coil packs, so that loom is ruled out. Cylinder 6 gave all the same responses as the other working cylinders.

I unplugged the Power FC and tested continuity from the terminals from the ECU connnector (using R33 GTR ECU pinout diagram) cylinders 1-6 to the loom that plugs into the coil module. Again all was good.

I plugged in the old standard Nissan ECU (i'm supprised that it ran at all with bigger afm's and injectors!) and it still wont fire on cylinder 6.

So the ECU is sending the signal, the main loom is sending it to the connector at the back of the coil module, and the loom on the other half of the module is ending it to the coilpack. That leaves (from what I can tell) just the module itself. Its getting orders from the ECU but not sending it on the coil no 6.

The RB20 module I had looked the same, but the connectors were different (the plastic guides, pins looked the same) so i couldnt test with it. So i might just bite the bullet and buy one from a wreckers and hope that the process of elimination was correct :P

The only other option if its not the module, it it could be injector no 6 (Nismo's I bought new and have only been in the car for 2 - 3 thousand kilometers) or the the signal going goin to it.....

I'll try to totally rule out ignition issues then move on to the injectors next.

what about the coil its self?

Try swapping it with another cylinder, if the cylinder you swapped it with is then not firing then its the coil pack.

I bought a set of brand new Splitfire coils and fitted them, no diffence at all, definitely not the coils.

And I havent done a comp test because I cant see how i could blow a piston/ring when starting at car. It was perfect the last time i drove it when it was parked. On startup the next time, she was running on 5 cylinders. I cant see how it could have mechanincally failed so bad. If electrics arent to blame then youre right, i'll give it a comp test to check if its all good.

Thanks for all the help and suggestions guys, keep them comin!

  • 4 weeks later...

Found out what was actually causing the car to run rough. Turns out the inlet manifold gasket had let go into cylinder no6.

Never heard of that happening before, i expected it to be electrical or fuel related, oh well at least its running again. I finally get to drive it after about 3 months...... Cant wait :huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...