Jump to content
SAU Community

Recommended Posts

Has any one on here hooked up a switch to turn the ABS on/off in a skyline? I know it can be done as i've seen a few skylines in mags/clips with in-dash kill switches for the ABS, just not sure what wiring they are tapping into to do it. Is there an ABS relay or something that you can cut the power from?

Cheers guys.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/272947-turning-abs-off-via-a-switch/
Share on other sites

I had a read, didin't really answer anything for me lol.

I want to be able to turn it off when I don't want to have it engaging. Reason being, if i over power the ABS and have it get an error, the light sometimes stays on for a day or two before it magically turns itself back off and has ABS working again. On the street i want the ABS to work, however during other off street activities i don't want to be over powering it trying to get it to turn it self off and get an error. Whenever i throw the car into circle work or try to light up the tyres (even if i don't hit the brakes) it can still get an erorr and then i don't have ABS until it decides to reset itself.

Hope that kind of makes sense. I'd just rather have control over it. Thought it might be a simple thing to do, but i can't find out how.

you just replace the ABS fuse with a switch. simple. remember to run a fuse though inline with your switch rated the same as the one you've removed.

Thanks for that man, thought it would be something simple :D

My point is that a competent driver doesn't need ABS. A competent driver reads the road, and can anticipate the need for brakes, not "Oh SHHIIIITTTTTT", and stomp on brake pedal.

I got my 32 in 2000. It has ABS. It was the first car I ever had that had ABS. I have activated the ABS on 2, maybe 3, occasions. The first was on the track shortly after I got the car, and I didn't really realise at the time that it was the ABS. The rest of the time, I simply apply brakes up to the threshhold of wheel lockup, in effect I am the ABS unit.

Learn to drive, and you won't need ABS, so you won't need the swtch.

What happens if you forget to turn the ABS back on? (and don't say you won't - we all forget things accasionally)

My point is that a competent driver doesn't need ABS. A competent driver reads the road, and can anticipate the need for brakes, not "Oh SHHIIIITTTTTT", and stomp on brake pedal.

I got my 32 in 2000. It has ABS. It was the first car I ever had that had ABS. I have activated the ABS on 2, maybe 3, occasions. The first was on the track shortly after I got the car, and I didn't really realise at the time that it was the ABS. The rest of the time, I simply apply brakes up to the threshhold of wheel lockup, in effect I am the ABS unit.

Learn to drive, and you won't need ABS, so you won't need the swtch.

What happens if you forget to turn the ABS back on? (and don't say you won't - we all forget things accasionally)

so your saying every time you get behind the wheel your mind is 100% on the job from start to finish, your eye's never leave the road for a split second. A blanket stament like a compitent driver dosn't need abs is bs. abs is still a very handy tool for emergencies, it only needs to save you once to be worth having.

but the point about forgetting to turn the unit back on is very valid

My point is that a competent driver doesn't need ABS. A competent driver reads the road, and can anticipate the need for brakes, not "Oh SHHIIIITTTTTT", and stomp on brake pedal.

A competent driver in a good car doesn't need AWD either.

What happens if you forget to turn the ABS back on? (and don't say you won't - we all forget things accasionally)

Your ABS dash light comes on when your ABS unit has a fault. If he checks his dash, and he should to at least check his speedo occasionally, he'll be aware that ABS is non-functional.

But a competent driver doesn't need a dash either, I suppose. You can just learn to judge speed by watching how fast the scenery moves, determine your RPM by the engine noise, and work out if your car's having some other engine fault by feeling the ECU cut power.

sav man's got a point that every day is not race day for a street car in the real world, and distraction or tiredness can affect your ability to react in a timely manner. All it takes is some kid (or animal) to run out from between 2 big cars. Something you're not likely to see. A reflexive stab of the brakes with a swerve to avoid in the wet could put you in big trouble.

As an aside, in a modern car with decent ABS the car is quicker with than without. It'll pull up faster more consistently, and it'll allow the driver to trail brake with less concern of having the car under or oversteer.

The original ABS was a bit useless, like any Version 1 product, but the refinements made to it in the last several decades has made it a viable electronic performance feature.

My point is that a competent driver doesn't need ABS. A competent driver reads the road, and can anticipate the need for brakes, not "Oh SHHIIIITTTTTT", and stomp on brake pedal.

I got my 32 in 2000. It has ABS. It was the first car I ever had that had ABS. I have activated the ABS on 2, maybe 3, occasions. The first was on the track shortly after I got the car, and I didn't really realise at the time that it was the ABS. The rest of the time, I simply apply brakes up to the threshhold of wheel lockup, in effect I am the ABS unit.

Learn to drive, and you won't need ABS, so you won't need the swtch.

What happens if you forget to turn the ABS back on? (and don't say you won't - we all forget things accasionally)

have u ever stared at a wall going 150k's an hour sideways?

its easy to say its fine to regulate ur brake pedal when everything is going ok, but id like to see that competancy going to work in an emergency situation where u have a split second to act before u hit something at high speed.

My god guys, i didn't mean for this to become a discussion about whether or not a person needs ABS lol.

The ABS error light will come on when disengaged and the missile switch cover i have will be open, so it will be a bit hard to forget to switch it back on. I'm not worried bout that at all.

My point is that a competent driver doesn't need ABS. A competent driver reads the road, and can anticipate the need for brakes, not "Oh SHHIIIITTTTTT", and stomp on brake pedal.

I got my 32 in 2000. It has ABS. It was the first car I ever had that had ABS. I have activated the ABS on 2, maybe 3, occasions. The first was on the track shortly after I got the car, and I didn't really realise at the time that it was the ABS. The rest of the time, I simply apply brakes up to the threshhold of wheel lockup, in effect I am the ABS unit.

Learn to drive, and you won't need ABS, so you won't need the swtch.

What happens if you forget to turn the ABS back on? (and don't say you won't - we all forget things accasionally)

Your not always on the track tho are you?

So your saying that if someone pulls out infront of you on a highway, your doing 100km/h, your going to analyze the situation and apply to the threshold? i bet you jam them on because you got the fright of your life.

But i agree, this is no pro/con discussion, let it go. ABS is fine, and if its doesnt come on, your braking fine.

  • 2 weeks later...

blind_elk how old are you?

We adults use our cars to commute, the road is for us to get from A to B, it's not a race track.

Example, you're driving 70km/h down a main road, a stupid 5 year old kid runs out to catch his ball, you won't have freaken time to "anticipate" when to brake, your instant reaction is to stomp on the brakes.

Imagine that example IN THE WET.. good luck you 15 year old keyboard warrior.

Nope it was a factory option. Easy way to tell, turn your key onto ignition, do you have an ABS light at the top left of your dash? In your engine bay your ABS is in the top right behind the strut tower with lots of hard lines going across your firewall to the other side. Check those two things and you will know if you have ABS.

Edited by PM-R33
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • On 12th June, the mechanic could not figure out what the issue was, but the car seems to be flooding with fuel. He was suspecting the tune, thus referred me to a tuner. Although the tuner is not familiar with Nistune, last Monday (30th June), he came over to try and re-map it. Despite the tuner trying to completely stop fuel, it kept sounding like it was pushing fuel. Tuner ended up suspecting either the ECU or Injectors. I do not believe the ECU or Nistune is the issue, as the Nistune software reads and communicates properly. Today, I removed the (new) injectors to see if they are clogged or leaking. Surprisingly enough, after those 3 days of driving, injectors 2 and 3 look very blocked. You can see the difference in the picture. I blew a bit on 3, that is why it doesn't look as clogged as 2. I am still unsure if this is what is causing the no start issue, but I am now feeling that I may have bought the injectors and Nistune without the need to do so, as the problem seems to be coming from somewhere else.  
    • haha this shit box doesn't drink coolant, for now       Let me guess, they make heaps of power, use the car for straight line driving and don't care about noise
    • They’re so great that I know of someone pulling one out to go back to a sequential 
    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
×
×
  • Create New...