Jump to content
SAU Community

Recommended Posts

easily overloaded tho

say u wire in power from the ciggie lighter

then plug a GPS into the ciggie lighter can cause it to overload and blow the fuse.

They're on two different circuits. The lighter power and light power sources are different.

I had a guy come to me wanting me to wire in 8 gauges (yes 8) in his car. What I had to do was use relays to power both sides and use the spare in his fuse box for overload.

If you're only running the one gauge you'll be okay to pick it up from the lighter light circuit, even better if you used LED's to keep the current draw down.

+1 for cigerette lighter. the light uses a serperate power feed but the same earth as the power for the lighter itself.

mines been running off there faultlessly for near a year. Using an LED in my boost gauge but :bunny:

Link it off the ring around the cig lighter. That turns on with headlights

Its the top connector in the picture below;

gallery_46113_2344_49202.jpg

Instructions on how to get to it is here;

http://www.skylinesaustralia.com/forums/R3...em-t204874.html

I'm also trying to find wire clips (that let you tap into power from an existing wire), but can't for the life of me find them on the Jaycar website, are they called something else?

I'm also trying to find wire clips (that let you tap into power from an existing wire), but can't for the life of me find them on the Jaycar website, are they called something else?

Scotch lock quick splice connectors. You can also use T-taps.

Should have mentioned. Go to any car parts mob like Malz, or Stupid Cheap. You'll have a better chance of finding them there than at Jaycar who are more electronics oriented.

I'm also trying to find wire clips (that let you tap into power from an existing wire), but can't for the life of me find them on the Jaycar website, are they called something else?

Dick Smith have some that wrap around the source wire, and provide a spade connection for the branching wire.

o cheers for the info

my friend must of linked it to the wires going to the actual ciggie lighter .. not the circle light around it.

so if i link a boost gauge to that wire it will dim it self at night?

o cheers for the info

my friend must of linked it to the wires going to the actual ciggie lighter .. not the circle light around it.

so if i link a boost gauge to that wire it will dim it self at night?

If you use the cigarette light, it will be full brightness at night, and not light at all during the day. Though if you lightsource the climate control uses, it will be full brightness during the day and dim at night (that's if the light will work on the dim voltage whatever it be)

so if thats the case i would connect the purple dimmer wire on the guage to the climate control and the red power wire to the ign wire or something similar?

Now that I think about it, putting the dimmer wire on the climate control is a bad idea, since you would need the climate control always turned on.. I didn't think about that consequence since my CC is always on. Stock headunits have a dimmer function iirc, if you have a aftermarket headunit just look for a wire not connected (im guessing nobody keeps the dimming function with A/M decks)

you dont need the light to be on during the day?

just go straight to the cig lighter light. Easiest and most effective. Dont worry about diming and stufff. If your that worried put a variable resistor in the circuit somewhere....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...