Jump to content
SAU Community

Recommended Posts

I got the Toyota minolta 88C-V last night, and added a turbo, 1080hp i think, its fast and pretty good but my god its twitchy, Mind you im playing with a controller and traction control and ASM on so when its oversteering its catching the car and putting fairly bad understeer into it which shoots it straight off if your not careful. Has anyone found a way to fix this?

dont be useless. lose the extra turbo.. lose the TCS.. lose the ASM.. even with the controller its not hard to feather the throttle where you need to. dont forget those le mans cars are engineered to only turn properly at high speeds or under throttle, so if you slow down to much and have no throttle on going through a corner you will be absolutely murdering your potential lap time. even on extremely low speed corners you need to be at least partially on the gas through the corner to maintain proper grip and neutral steering

the same applies for virtually all le mans & F1 cars

But more power is always fun :P

Think it's just the asm catching the oversteer and making it unpredictable. Will have a go with it off next time. Need somewhere to clamp my wheel and pedals so I can race properly

Edited by 89CAL

Anyone else on here got an X1?

If so, what's your best Tsukuba lap? My best so far is 29.6

I got one last night that thing is stupid fast and hard to control with a pad, i did probly 10 laps with it and my best was a very very sloppy 32 something, I need lots of practice just to keep it on the track it is just so fast.

accelerating very slowly- the bumps knock it around quite badly, and it's very twitchy with the d.f set to minimum. also realized the toe-angles were set to - and +1 front and rear standard, which may have scrubbed some speed. car makes less power now so there's no point trying again

it's geared to do 507 (which you can't change), you should be able to get 490 or more if you cruise up behind a Le Mans car 3/4 of the way down the straight and get an aero tow

I think I only managed 420 or so in the veyron, but that was just a practice run to see if it would hit 400 with no other cars on the track. got my 111 feet per second or whatever it is lol so i was happy. Been hitting B-spec lately. My hot headed driver is getting quite good at level 12. Nowhere near as much frustration

farkk it.. old ps3 packed up good and proper last week. just went and bought a new slimline. how lucky was i to backup my gt5 data about 2mins before it broke.. although all my other game saves are down the tube.. ffs sony needs to sort their shit out and come up with a way to transfer saves off the old hdd

farkk it.. old ps3 packed up good and proper last week. just went and bought a new slimline. how lucky was i to backup my gt5 data about 2mins before it broke.. although all my other game saves are down the tube.. ffs sony needs to sort their shit out and come up with a way to transfer saves off the old hdd

erm, doesn't the "backup" utility do this?

I upgraded to a 500GB HDD and all my save games went across no worries. Just needed to re-sync the trophies.

erm, doesn't the "backup" utility do this?

I upgraded to a 500GB HDD and all my save games went across no worries. Just needed to re-sync the trophies.

i didnt upgrade, my console died. making it impossible to get access to my saves.

one time i tried the backup utility it tried to backup everything on the drive, movies, music, the lot. didnt have a flash drive big enough for it. i only need a backup of saves but it doesnt let you do that

i didnt upgrade, my console died. making it impossible to get access to my saves.

one time i tried the backup utility it tried to backup everything on the drive, movies, music, the lot. didnt have a flash drive big enough for it. i only need a backup of saves but it doesnt let you do that

I know, but you could still remove the HDD from the stuffed PS3, put it in the new PS3, perform the backup to an external HDD then put the original HDD back in the new PS3 and "restore"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...