Jump to content
SAU Community

***official Sau:sa Dyno Day Thread***

MissR34

By MissR34,
in South Australia

 Share

Recommended Posts

  • Replies 443
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Krishy Grand Master

Krishy

Posted
Posted
i think hes running yellow jackets like me, i got 189.6 rwkw on 10psi (might have spiked higher, no readout on dyno chart). last dyno run i had 173 on 13psi without coilpacks or dump pipe.

what plug gaps you running vu?

my dyno chart is once again flat mid way... needs a good tune, think there's a few kw in there somewhere too, have a feeling it might crack 200 on 12psi.

Dont see why you can't Marko....well i am making 214 on 12 so you should be close if not over the 200 mark

Yeah I'm running Yellow Jackets @ 0.8mm gap, going to leave them at 1.1 next service I reckon.

0.8 is what you should be running and the 1.1 is the stock gapping unless your running stock boost then you will need to run the 0.8 gapping....heard of cars not running right with 1.1 gapping and 11psi

Did this also occur at the GWW also?

All Pulsar dyno days that i have been to have been held at GWW and as far as my dyno sheets concerned it had, power, boost and afr readings

I'd also like to add that GWW dyno'd 39 cars in one day for the Pulsar day and checked the AFM's and boost pressure for every single car.

http://www.dynoday.info/results2009.html GWW get my vote for the next dyno day :D

+1

Brett was stuffed after that day....loading up 39 cars, strapping each and everyone.....setting the dyno for RWD and then AWD was a bit of a pain but what an effort.....

It was a awesome day regardless....concerns/valid points are no doubt will be looked at for the next DD event

Carbon 34 Grand Master

Carbon 34

Posted
Posted
wicked troy cheers for those man.....car looks decent in those shots

thanks,, not sure who it was who asked me to take Vu's photo but hear ya go.. he comes in second place to Pete in snags...lol

maybe a new contest for loxton, who can eat the most snags before chucking..lol

Dohmar Grand Master

Dohmar

Posted
Posted
During our committee meetings, several dyno workshops were considered. We were concerned with some aspects, such as the steep access to BW and the main road location of GWW as some examples. SHT seemed the suitable option. This was thoroughly discussed at our Committee meetings, and John was approached. Its got nothing to do with the fact that Cara takes her car to SHT. One aim of SAU:SA also is to help out small businesses where we can. We held one of our fundraiser BBQs at Ministry of Bass (helping the smaller business) ... yet no one complained about why didn't we have it at Tonkins etc. You can't keep everyone happy all the time, so a selection was made for what we considered was the best for the majority. SHT's workshop has easy access for any lowered car, and no neighbours to complain about noise, and should it have been raining there was heaps of undercover space. The premises was very accommodating ... pity about the annoying wind. We were thinking of you as entrants and spectators when we selected SHT. As mentioned before, your concerns will be taken on board. They are all valid points. This will set the benchmark for the next event we run. We will only get bigger and better

Very well said

-D

RubyRS4 Grand Master

RubyRS4

Posted
Posted

A small update:

As announced at the Dyno Day on Saturday 15th Aug, Skylines Australia - South Australian Chapter is officially CAMS Affiliated for those hanging out for it.

The Certificate of CAMS Affiliation was received in the mail yesterday, which I have in my grubby hands now :P

I am getting the new membership cards prepared this week for all members (current and new) tonight. Unfortunately, I am at TAFE nights on Wed/Thu nights and leaving Friday for Ballarat for 4 days. I'll see if another committee/club member can kindly meet/hand out the new cards in my absence.

Spread the word. I'm aware some potential members were holding out, waiting for this affiliation.

:banana:

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...