Jump to content
SAU Community

R33 Rb25de Non Turbo Hks Super Drager Catback Exhaust

OoskylineoO
 Share

Recommended Posts

OoskylineoO Experienced

OoskylineoO

Posted
Posted (edited)

Item : HKS Super Drager Cat Back Exhaust system RB25DE

Specs : 2.5'' Mandrel Bent, comprised of a mini muffler type silencer followed by a small hotdog and baffled muffler

Condition : Excellent condition ! , has NO kinds of dents or holes whatsoever apart from extremely minor scrapes,

Was on my NA r33 gts4, never had to do any of that angling stuff to get over speed humps indicating my car was either very close or if not stock height.

Reason : Turboing the gts4 and upgrading to larger exhaust system.

Personally i think it was the best NA exhaust I've had, specially designed by HKS for the NA RB25DE, DOES NOT DRONE whatsoever like what i got from cannons and won't give you a throbbing headache from long/highway drives/cruises, on idle its close to stock and when giving it a bit gives off a very good tone, its loud when it wants to be.

Power wise, the exhaust might look restrictive but the car actually felt more responsive. This together with coby extractors and a high flow cat set up, i was able to pull mid-high 14s at WSID.

Price : $600ONO this is an extremely rare and genuine item from HKS, I even have the booklet/manual :S that came with it, if you can read japanese then it'll tell you how good it is lol. I prefer keeping the exhaust then letting it go too cheaply. Was worth $1400 brand new.

PM if interested :D

PS. I'm also planning on selling my set of Coby D12 Extractors soon.

post-40593-1245320188_thumb.jpg

Edited by OoskylineoO
Victory Mentor

Victory

Posted
Posted

Would this fit on a R32?

We are building a R32 with a R33 RB25de and are looking for a system like this. Whould it just mean taking a few inches out of the front section to fit the shorter R32 floor pan?

bert_ Rising Star

bert_

Posted
Posted

it should fit with some modification, but dont quote me. this is a very good exhaust for a n/a set up. they're pretty expensive when you buy them brand new. for me personally i think its very cheap for the condition its in.

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

it won't be a direct bolt on obviously but yes i think you will have to do some modifications to it in order for it to sit in correctly.

My contact number is 0434282321 SMS me if you have any questions

Edited by OoskylineoO
  • 3 weeks later...
nafan Enthusiast

nafan

Posted
Posted

hello there iam interested in your exhaust system but iam in victoria. would you be able to post in down here iam will to pay for it to get down here. get me back asap

OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

CURRENTLY HELD OFF SALE AT THE MOMENT

GOING TO HAVE TO HOLD ONTO THE EXHAUST FOR A FEW MORE WEEKS, MECHANIC IS BUSY AND HAS RESCHEDULED MY ENGINE CONVERSION SOMETIME NEAR THE END OF AUGUST :P !!

BUT UNDOUBTINGLEY WILL BE BACK UP FOR SALE ONCE MY CAR GOES IN, SORRY IF I HAVE WASTED ANYONE'S TIME.

  • 1 month later...
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. $1000ono

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...