Jump to content
SAU Community

Recommended Posts

Item : HKS Super Drager Cat Back Exhaust system RB25DE

Specs : 2.5'' Mandrel Bent, comprised of a mini muffler type silencer followed by a small hotdog and baffled muffler

Condition : Excellent condition ! , has NO kinds of dents or holes whatsoever apart from extremely minor scrapes,

Was on my NA r33 gts4, never had to do any of that angling stuff to get over speed humps indicating my car was either very close or if not stock height.

Reason : Turboing the gts4 and upgrading to larger exhaust system.

Personally i think it was the best NA exhaust I've had, specially designed by HKS for the NA RB25DE, DOES NOT DRONE whatsoever like what i got from cannons and won't give you a throbbing headache from long/highway drives/cruises, on idle its close to stock and when giving it a bit gives off a very good tone, its loud when it wants to be.

Power wise, the exhaust might look restrictive but the car actually felt more responsive. This together with coby extractors and a high flow cat set up, i was able to pull mid-high 14s at WSID.

Price : $600ONO this is an extremely rare and genuine item from HKS, I even have the booklet/manual :S that came with it, if you can read japanese then it'll tell you how good it is lol. I prefer keeping the exhaust then letting it go too cheaply. Was worth $1400 brand new.

PM if interested :D

PS. I'm also planning on selling my set of Coby D12 Extractors soon.

post-40593-1245320188_thumb.jpg

Edited by OoskylineoO

Would this fit on a R32?

We are building a R32 with a R33 RB25de and are looking for a system like this. Whould it just mean taking a few inches out of the front section to fit the shorter R32 floor pan?

it should fit with some modification, but dont quote me. this is a very good exhaust for a n/a set up. they're pretty expensive when you buy them brand new. for me personally i think its very cheap for the condition its in.

it won't be a direct bolt on obviously but yes i think you will have to do some modifications to it in order for it to sit in correctly.

My contact number is 0434282321 SMS me if you have any questions

Edited by OoskylineoO
  • 3 weeks later...

hello there iam interested in your exhaust system but iam in victoria. would you be able to post in down here iam will to pay for it to get down here. get me back asap

CURRENTLY HELD OFF SALE AT THE MOMENT

GOING TO HAVE TO HOLD ONTO THE EXHAUST FOR A FEW MORE WEEKS, MECHANIC IS BUSY AND HAS RESCHEDULED MY ENGINE CONVERSION SOMETIME NEAR THE END OF AUGUST :P !!

BUT UNDOUBTINGLEY WILL BE BACK UP FOR SALE ONCE MY CAR GOES IN, SORRY IF I HAVE WASTED ANYONE'S TIME.

  • 1 month later...

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. $1000ono

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...