Jump to content
SAU Community

Recommended Posts

Krishy, I've been told that your entrance was paid as well as abes from cara. Since Cara is no longer involved, you should give Stuart a call in regards to this. While I'm not responsible for co-ordinating entrants payment of the show, I would say that perhaps not all items were posted on the same day and that you might get yours on Monday. If not, call Stuart - I know Cara has confirmed on his behalf that they have recieved both yours and Abes entry fees - did you lodge the form with it? In either case, the entry fees and forms are your responsibility and you should follow this up directly with stuart.

-D

Sorry Ben there was a big f**kup on my reading skills and not fully reading the letter that was sent out to me....i am entrant #12....so just disregard my request please.

Travelmate Online:

Gawler to Loxton = 205km, 2hr 43min

Murray Bridge to Loxton = 176km, 2hr 20min

Suppose it depends where you live and how long it takes you to get to either Gawler or Murray Bridge....from my home it's 1 hr either way, (MB is 20km further but no stop lights & has less traffic).

So total km for me would be approx the same either way yet I save almost 1/2 hr off my journey with less traffic to dodge. :cool:

I am working in Murray Bridge on Friday and i will take my car instead of the work car and head to loxton with Shane, Abe, and Pete.....as thats what makes sence atm...going to loxton via Murray Bridge means going through Karoonda which is where i was last week....loxton it something like 123 or so KMs away from Karoonda

I may meet up at Murray Bridge, PM sent Pete.

You have my digits mate....just give me a hoy and i will meet up with you at the BP

No probs Krishy, got yours and Andrews plates already in the car so I don't forget!

I will be heading over after work via Murray Bridge if anyone going later in the evening (approx. 6pm leave).

Thanks Martin....will have your money...i mean payment when i recieve the drugs

  • Replies 714
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just come to Murray Bridge BP Luke as thats where i am meeting up with Abe and most likely Shane and Pete.....

Also Abe does my room have a double and a single bed in it....if so Luke then you can share the room with me mate....just share the costs really.....

Also Abe does my room have a double and a single bed in it....if so Luke then you can share the room with me mate....just share the costs really.....

And Share the LOVE!!! LOL

Since when you been going ryan, ill be dunking on you at the 9foot rings they got at the school

looks like my family hook ups are doubtfull so any one got some floor space to rent i can crash on :cool:

Edited by Inline 6
Bit of a convoy happening down south too..... that's 5 of us now....cool

Shane was thinking about a 2pm departure so that's approx 3pm in MB.

Might be earlier though....details to follow.

Great so if anyone can give me a call once the convoy reaches MB that would be great. Pete you have a pm with my contact just in case :cool:

Since when you been going ryan, ill be dunking on you at the 9foot rings they got at the school

looks like my family hook ups are doubtfull so any one got some floor space to rent i can crash on :cool:

Dan, you and Luke need to speak to Abe ASAP - he has a couple trundle beds which are at this moment not spoken for.

-D

 

There will be a couple of us departing Adelaide at around 4:30-5am Saturday morning aswell if anyone is keen??

Where abouts are you meeting/leaving from?

Are you in the show or just going for a look, arriving 8:30am could be a tad early if the gates are opening to public at 10....

 

Where abouts are you meeting/leaving from?

Are you in the show or just going for a look, arriving 8:30am could be a tad early if the gates are opening to public at 10....

No he is going for the show, 830am is ok that will give you 1 hour or so to get the car ready
Since when you been going ryan, ill be dunking on you at the 9foot rings they got at the school

You best be bringin yo A game fool! Me and Bek going to be runnin those courts like Karim/Majic :ninja:

Yeah will be bringing the new pocket rocket up to the show :)

Ryan

Krishy you should get yours Monday...hopefully, as i got mine on Friday.

I'm not sure which way I'll go, I'm South (Aldinga), and whereis.com.au is saying the fastest/shortest way is to head north to Salisbury, Nurioopta, Blanchetown, then onto Loxton. Hmmm, to leave at 1pm or 2pm...

Shame to hear about the front lip Ben, after all that was done.

U gonna pick me up or will i have to find my own way to ur place? I may go to school for a little bit in the morning. I could get mum to drop me off at ur place or near ur place, but i highly doubt it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...