Jump to content
SAU Community

Recommended Posts

The yellow bar is of no concern, I think from memory it says something like "Information" my screen shows the yellow bar with japanese characters too.

I agree with Pure, it may just be a service reminder, a few people here though can read japanese so they may be able to confirm.

Have you ran the diagnostic test to see if you get error codes? If not, do a search of the forum and you should find the test to perform.

i thought the yellow bar meant you have no navigation disc inserted??

anyway, have a search for 'V35 pit', and there are detailed instructions on how to clear that. its not serious, its a service interval reminder is all

i thought the yellow bar meant you have no navigation disc inserted??

anyway, have a search for 'V35 pit', and there are detailed instructions on how to clear that. its not serious, its a service interval reminder is all

*cue music*

Tell him what he's won Dave!

*cue crowd cheering*

Well for his effort to alleviate any worrying by "scottnothing", zei20l, or Iain as others know him, has won a fantastic prize consisting of his name associated with solving problems for M35 Stagea's for the lifetime of the SAU website!

*crowd applause*

Not only that! But if you look deep enough, you will find this correct answer in the annals of internet history for all time!!

*crowd goes nuts*

Ladies and Gentlemen! ZEI20L!!!!

.... yes it is a slow work day.

Edited by iamhe77
  • Like 1
i thought the yellow bar meant you have no navigation disc inserted??

Double bonus,,,,,,, he got this one right toooooo..... yyyeeehhhhhh.

Let us know if you can not find the instructions of how to clear with a search on the forum. very easy.

Cheers

Andy

Ill have a look for the stuff to clear it. Weird that it would be a service indicator as it only just past 43000. Kinda strange time to service.

It would be cool if you could push something and some lil Japanese guys would come from nowhere and change your tires and fill your fuel.

Ill have a look for the stuff to clear it. Weird that it would be a service indicator as it only just past 43000. Kinda strange time to service.

It would be cool if you could push something and some lil Japanese guys would come from nowhere and change your tires and fill your fuel.

the service intervals are user set so they can come up any time.

I am a bit of a rookie at the forum thing but i cant find the instructions to remove the Pit on the display.

Also does anyone know how to manually set it?

Cheers,

OK.....(I want a prize for this Cameron!)

1/hit the 4th button along the top of the HU display controller.

2/Scroll down to the second last setting....just before ECT....and push the controller in.

3/press controller in again

4/scroll up 1 press controller in again....this reset's

5/then go back 1....bottom RH button once on the HU display controller

6/scroll down one and repeat steps 3 to 5

7/scroll down another one and repeat steps 3 to 5

8/scroll down another one and repeat steps 3 to 5

9/done

to manually set it just set the KM's to what you want....don't know what the translations are though.

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...