Jump to content
SAU Community

What To Do Before Turbo Upgrade

wayde

By wayde,
in Engines & Forced Induction

 Share

Recommended Posts

wayde Enthusiast

wayde

Posted
Posted

i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

Link to comment
https://www.sau.com.au/forums/topic/277192-what-to-do-before-turbo-upgrade/
Share on other sites
ONE-VIA Collaborator

ONE-VIA

Posted
Posted
i just want to know what to do before i can upgrade to a high mount turbo. Hopefully keeping stock internals if possible.

Fmic, 3 inch hks exhaust tyrbo back, upgraded suspension and slotted hd brakes. Boost controller, turbo timer, bosch 550 hp fuel pump. I know this car had a 500 hp engine before i got it now has half cut engine new stock turbo and gear box. I think the heads from old engine but not sure.

Cheers

Wayde

is that what you have or did you just answer your own question

EeLeYe Mentor

EeLeYe

Posted
Posted

Make sure you uprade the AFM with a new turbo. They tend to suck just that tad extra air lol. After my turbo upgrade when I had a PFC, I had to get a Z32 AFM to manage the extra volume of air.

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
clutch and diff will need to be done, but depends on power.... there are actually some dipsets out there that will highmount a 200rwkw turbo setup just for looks...

Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
ok, so you are going to tell me that a stock diff is as good as a mechanical one for hi-power applications.... :rofl:

looks like every serious race car in the world has just wasted a bunch of money.... what idiots

have you ever driven a car with a mechanical diff? i'd guess not if you think that the stocker is fine for close to 400rwkw

i have the same power level you do and my diff was probably the best non power upgrade i have ever done

200rwkw is hardly a "high power application".

Don't go off tangents.

The person on this thread asked "what should I do prior to upgrading my turbo?"

At around 200rwkw (what a stock turbo is usually capable of pulling reasonabley safely), it WOULD be a waste of money to upgrade the diff. Standard diff is more than sufficient to support 200rwkw.... :D

Unless you can prove otherwise?

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted
Wrong....

I have 312rwkw my diff is fine. A mate with the exact setup as mine has 364 rwkw and his diff is fine and has lasted 3 years now and still going.

Why would you get an upgraded diff for 200rwkw?

no to mention... if you actually READ my post you'd realise that i said the clutch and diff will need to be done depending on power level.....

the turbo is not mentioned, thus the power is at this point an unknown quantity... and at no point did i say a diff was needed for 200rwkw

what i said was that some people are stupid enough to highmount a 20rwkw setup for looks only....

also fwiw i personally would definately get a diff/weldy for 200rwkw... my rolla is currently having a 150rwkw build and it already has a welded diff

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

and a diff is never a waste of money... a weldy can be had for virtually nothing.

with the 4ac in my rolla putting out an epic 40rwkw you can STILL notice the difference with a locked diff

mad082 Grand Master

mad082

Posted
Posted
If you read his first post, you will notice he has the stock turbo on it............ :rofl:

so the point of this thread is what should he do before he upgrades his turbo to a stock on is it?

LOL

back on topic,

clutch

injectors

ecu

AFM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • Dose Pipe Sutututu
      S1 rb25/s14 starting problem

      By Dose Pipe Sutututu · Posted

      When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...