Jump to content
SAU Community

Recommended Posts

Hi everyone,

Im form Tas looking at going to Melb to buy a skyline. I have only driven an R33 once or twice so was wandering for first time should i buy a R33 GTST or go for a GTR or R34 GT-T. Also Should i go to a dealership or private

They are 3 completely different cars and only you can make up your mind which one suits you the best.

There are also plenty of quality cars in Tassie already so unless your wanting something different or cant find what your looking for (which i would find hard to believe) then why not buy locally???

Either way all the best with the purchase and welcome to SAU

I've noticed due to the smaller market down here, it's harder to find what you want and also they can be a bit more expensive..

Plenty of cars around just harder to find and you will find that money talks 99.99% of the time :P

Thanks for all your imput im heading the way of getting a R33 GTR. Im also going to go to mainland as cars in general seem cheaper. What would be the best way to go a dealer or private?

I have found an 1996 GTR V Spec in Vic for $20,990 private sale. Is that a reasonable price? Has 84,000k's. I have spoke ot his mechanic and he is going to send me the service history

Get it lol

I have found an 1996 GTR V Spec in Vic for $20,990 private sale. Is that a reasonable price? Has 84,000k's. I have spoke ot his mechanic and he is going to send me the service history

Looks like i will be getting this one from Melbourne, hopefully this sat. I got the price down to $19,000

Looks like i will be getting this one from Melbourne, hopefully this sat. I got the price down to $19,000

Received a few service invoices from mechanic, also mechanic did an inspection whihc cost the owner $60. Had a list of a few things to get fixed such as LED in spoiler, Handbrake adjustment 2 new rear tyres and rear brakes. Owner is getting those fixed

I went to Melb on sat and brought the 1996 GTR V-Spec. Im very happy with it. The only bad thing is it bottoms out at the bottom of my drive and scrapes on gutter in front of garage. I have already put a crack in front bar. Im to scared to get it back out. Need to figure out a way to cove gutter.

I went to Melb on sat and brought the 1996 GTR V-Spec. Im very happy with it. The only bad thing is it bottoms out at the bottom of my drive and scrapes on gutter in front of garage. I have already put a crack in front bar. Im to scared to get it back out. Need to figure out a way to cove gutter.

Dynobolt some thick Checkerplate over the drive way to reduce the angle.

and lol change your car under your av remove the commy Vspec ftw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...