Jump to content
SAU Community

Recommended Posts

Hi all,

I have some HID kits left over from a group buy that need to go.

H1 6000k (R33 GTST)

H1 8000k (R33 GTST)

H4 6000k

H4 4300k

HB3 8000k

(IS200 low and high beam)

HB4 8000k

H11 4300k

D2S 6000k

All kits are $180 Delivered. $19 cheaper than GB price.

I also have a kit that i made up from spare bulbs and ballasts: H4 4300k $100 (one ballast was used for a month, still in perfect working order)

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/277558-left-over-hid-kits/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

HID works best with projector lights as the beam pattern is focused.

HID works with all bulb types.

Are you sure your car has H4?

I thought 32s had either H1 or H3?

HID works best with projector lights as the beam pattern is focused.

HID works with all bulb types.

Are you sure your car has H4?

I thought 32s had either H1 or H3?

i have N1 headlights which uses h4, previously had projector ones which had h3c

which brand are these???

Mostly VEGA DIAMOND, some BOSCH.

i have N1 headlights which uses h4, previously had projector ones which had h3c

OK no problem. Just to let you know these are single beam kits and do not do high beam.

If there is anyone who has put HIDd into the N1 headlights please shed some light as to what kit you have out in?

hey mate, do the 6000k H1 also direct fit for 34 gtt? or they use different harness?

edit: also are these the bosch/philips ones?

Edited by .:: GimpS-R34 ::.

hey mate im keen to buy a set

i have a 34gtt

and it doesnt have xeon lights anymore coz they got taken out when they complied it i think

do u have any kits for me?

and how much extra for some led parkers?

thanks heaps mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...