Jump to content
SAU Community

Recommended Posts

ok, this is right up my ally...kinda

1. No one is doing the compliance for a V36 SEDAN, lots of coupes out there

2. The reason is that 'there isnt enuf interest in the market'....even thou i told them i would provide the test car but they all refused saying its not worth it.

3. Thus, the only way you can bring one in is through the 12month ownership rule, which i don't think will happen since your not in japan.

...lol ive bugged guys at compliance shops about this till they told me to hang up and not call again!...i was very interested in one because i wanted my parents to get it instead of a new C class...but yeh they went ahead with the C class :( cuz there is no way....and by the looks of the market and consumer confidence, especially in the imported car market...i don't think we will see one any time soon or later, or even after that....but feel free to bug them a lil more! :)

ok, this is right up my ally...kinda

1. No one is doing the compliance for a V36 SEDAN, lots of coupes out there

2. The reason is that 'there isnt enuf interest in the market'....even thou i told them i would provide the test car but they all refused saying its not worth it.

3. Thus, the only way you can bring one in is through the 12month ownership rule, which i don't think will happen since your not in japan.

...lol ive bugged guys at compliance shops about this till they told me to hang up and not call again!...i was very interested in one because i wanted my parents to get it instead of a new C class...but yeh they went ahead with the C class :P cuz there is no way....and by the looks of the market and consumer confidence, especially in the imported car market...i don't think we will see one any time soon or later, or even after that....but feel free to bug them a lil more! :yes:

i just found out prestige motorsport in WA does import them.

http://www.prestigemotorsport.com.au/modul...hp?StockID=4745

sedans no idea ut in wa our prices are a little crazy. v36 coupe would be $90k at fabcar.

Understatement of the decade :yes: . $20k average higher than anyone else and you'd have to ask what warranty is worth that premium!!!!!!!!

And the vehicles are not "pristine" to warrant the premium costs!!!! A work colleague knows the DP thru' motorsports and let's just say it was no "glowing" report.

lol a little extract showing car is gonna be a bit more then the 43,000 quoted....

"We have included the cost of shipping, import duties, GST, and our service fee in this estimate. Please note that the price allows for a free compliance deal, whereby the vehicle would be used by a compliance workshop for several months as a sample vehicle. Should immediate compliance be required, allow another $3,850 for normal compliance, plus tyres.

Not included is the cost of tyres, Govt. stamp duty and registration (normal licensing costs for any vehicle)."

....but seriously for that price its WAY too expensive...plus if you do import it yourself im 100% sure you can have one complied ($3850) and on road for around $35000....but its good to know there is finally someone who is doing compliance...a bit late for me now thou :yes: come on NSW!!!

less if you import it yourself, probably $50k-ish for a very low km like new model

add another $6k to fix the navi and TV - already had two CKV36 coupes ask the question. (yes I have it worked out.)

as for complaince on the sedans - don't know of anyone doing htem I know RAWS in darra (top gear vehicle imports) are doing the coupe. both of my referrals came from there.

lol a little extract showing car is gonna be a bit more then the 43,000 quoted....

"We have included the cost of shipping, import duties, GST, and our service fee in this estimate. Please note that the price allows for a free compliance deal, whereby the vehicle would be used by a compliance workshop for several months as a sample vehicle. Should immediate compliance be required, allow another $3,850 for normal compliance, plus tyres.

Not included is the cost of tyres, Govt. stamp duty and registration (normal licensing costs for any vehicle)."

....but seriously for that price its WAY too expensive...plus if you do import it yourself im 100% sure you can have one complied ($3850) and on road for around $35000....but its good to know there is finally someone who is doing compliance...a bit late for me now thou :D come on NSW!!!

reads as: you buy it we will use it as a test car to clear compliance and gather evidence to do future cars.

fair call really as its a $30k a pop run on the emissions and the time involved in measuring and load testing every item on the car. means the shop that gets the test car doesn't have to shell out the $60k for the car on top of everything else.

Edited by Chris Rogers

ive just checked there website and indeed its $90k. now i just feel really bad buying it from them =(. was in a rush when i bought mine last oct 08 and ended up nearly $50k for my v35 at 18k kms. shouldve imported my own

I can't wait for a few of these to hit Aus.

I don't think there's anything wrong with what prestige are saying. As chris said, it's just a case of free compliance, and the fact that they'll need the car for about 6 months.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
×
×
  • Create New...