Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I think it's called facepunch.

it's sick.

what happens is, every time somone starts a which bov thread, this device punches the kunt in the face.

you should get one.

wow your funny. i tried searching for it and i couldnt find 1.

how about u come and try punch me in the face, i hate e-thugs

i didnt tell u to come in here and reply so f#%k off loser

I want to know what the best SOUNDING BOV is and also what the best PERFORMANCE BOV is!

they could be different BOV's or it could just be 1 that has both great sound and great performance.

i want flutter at low rpm if possible.

flutter at low rpm?

You can buy something like a Tial or a Turbosmart V-port. You'll have to wind the spring tension right off so it'll probably open up if you run any kind of real boost.

Ive been wondering about that bov from GFB i think which you can change from full atmosphere to plumback jst by twisting it. Fact is bovs are illegal so you might as well stick with stock gtr or jst dont run anything at all so you get the low rpm flutter your after.

Ive been wondering about that bov from GFB i think which you can change from full atmosphere to plumback jst by twisting it. Fact is bovs are illegal so you might as well stick with stock gtr or jst dont run anything at all so you get the low rpm flutter your after.

BOVs are only illegal in VIC and SA. Definitely ok in QLD. We don't have the same EPA laws they have. I think that is changing soon but for now it's all good.

Dunno where this guy lives though.

BOVs are only illegal in VIC and SA. Definitely ok in QLD. We don't have the same EPA laws they have. I think that is changing soon but for now it's all good.

Dunno where this guy lives though.

I got defected for BOV VTA a couple of months ago around the corner from the erd head office :P should I have contested it?

OP: I have a Tial 50mm sounds good just a nice quick exiting of air no silly putchuu chu cheeeee ft ft chu

If your car is stock why do you want to chang it?

A fully sik uleh BOV can increase a car's performance by 50% the longer the flutter the more powah it makes.

WTF is a performance BOV? if you want a "performance BOV" use the stock one!

bought a r33 with hks bov fitted already. car stalled randomly, swapped it with someones stock one, they were stoked, now it runs fine. moral of the story is they attract attention from cops, they do f*@k all for performance, illegal in some states, and can actually make your car run shit if its running a stock ecu! be an individual keep the stock one and save your money for something that needs fixing. if you drive it like a man that that shouldn't be long:)

  • 9 months later...

all the bovs basically makethe same pshhhh shit except the cheap oones will prob break or leak under more boost if you want a bov noise get a good branded one but my opinion since they are the first thing cops look for just block stock one off and flutter away sounds better than bov and not defectable and also should have your car tuned to running with atmos or no bov to help with the stalling and stuff or if you dont tune it gona have to adapt your driving style so it doesnt stall.

dose pipe with multiple bends to amplify the kilowatts generated by the fluttering

dude there messing with you

the flutter although it sounds great it actualy doing damage to you turbo!!!.

if you have your bov spring too loose it doeasnt vent properly so the air is forced back through your turbo (the wrong way ) to the

doooo dooo do do dod do do noise you hear is the blades of your turbo cutting through the air .

as for bov increasing power im no expert but if that were true it would be stated in the sticky about skyline power mods .

I want to know what the best SOUNDING BOV is and also what the best PERFORMANCE BOV is!

they could be different BOV's or it could just be 1 that has both great sound and great performance.

i want flutter at low rpm if possible.

Flutter is caused by the lack of a BOV. Theres another 11ty billion page debate thread on whether its dangerous or not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It's definitely not firing order. But I think it should also be made clear that the output that gets fired is the one that corresponds to the input that was switched at the ECU. So you could scramble them up totally so that the numbers meant nothing, and so long as you had the inputs and outputs matched up, you'd be fine. The reason I make that point is that blanket statements about what it is supposed to be don't always hold out in a world where there's been 30 years for the wiring to have been stuffed with.
    • Hello, im asking about this guy - coil igniter on rb25det series 1 r33 s1 engine. I need to know if pins on coil side indicate coils itself from 1-6 or it’s firing order so pin nr1 goes to 1st fired spark plug:(1pin-1firing spark, 2pin-5order firing spark, 3-3, 4-6, 5-2, 6-4…)   photo: https://files.fm/f/k9pdug38uq
    • Remove it. Certainly from the hub face. I'm not in love with leaving it on the wheel assembly surface either - but if it is common to do so, then....maybe fair enough. It's not difficult. Just time consuming. For the hub face you just need a large enough block and suitable grades of abrasive paper to get it off flat. The same would be true of the assembly face. Just more time consuming, probably needing a lot more care. It's defo going to be easier just to assemble the wheels as is, seal them up, and check them periodically to see if there's any movement or loosening of the fasteners, than it will be to remove it though.
    • Hello, I got my wheels powder coated and they've powder coated bloody everything the mating surface and hub (even told them not to lol) anyway should I leave it or remove it. (Would be very hard) I've searched a lot and lots of powder coaters don't mask the mating surface but do mask the hub surface. How bad it powder coat on the mating surface or hub? My question is what should I do?
    • Yeah, R34 with RB25DE likely has a 4AX01 box in it, which is a medium duty auto ~ with the RB25DET mill, it would've been fitted with 4AX00 (4AX13) heavy duty build (same case, different internals). An RB25DET will lunch on a medium duty 4R01 auto in pretty short order ...to give you some visual idea of differences between the 'medium' and 'heavy duty' boxes, you only have to look at the 2/4 band for comparison...it's chalk and cheese...(plus bigger high clutch, extra pinion in the planetary sets, higher oil pump output, different bearings, higher TC stall speed )... You can control them with just about any aftermarket TCU for electric-over 4-speed with TC lockup clutch (ie; the GM 4L60E and others)...I have a custom standalone TCU that includes MAP sensor (for turbo applications) along with TPS, RPM, and line pressure monitoring...in other words, I don't use any ECU signals...no real need to.
×
×
  • Create New...