Jump to content
SAU Community

Recommended Posts

hey guys,

I've just gotten back from holidays in Queensland (got to drive a friend of a friends 260RS). When I got home, I found a bat (or flying fox or something) has then a crap on my car. I went to wash my car tonight and it didn't wash off....so it looks like its been on there for about 2 days

does anyone have tips on getting it off

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/
Share on other sites

Be VERY careful with washing-up detergent. I would say do NOT use anything with detergent in it (it can damage your paint), but if you are going to wash it off straight away, you should get away with it.... The hot water is a good idea, but I'd honestly still prefer to use a car-washing soap.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4699710
Share on other sites

^what he said

Also, try Meguiars Clay Bar system, just make sure you use the quick detailer (waterless car wash stuff) with the clay bar. It should take out the caustics too, which is what will damage the paint :) Good luck and let us know how it goes

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4699812
Share on other sites

Depending on the type of bat.... mallet and chisel?

I get some pretty nasty bird crap on my car that those stupid high pressure car washes fail to remove (oh, but they'll rip the lower door strips alright :P ), I have been successful with the Maguiars Gold Car wash and the "mesh" side of my car mitt (it is one of those noodle ones from Autobarn).

I usually use cold water, but if they are particularly stubborn, warm water with the Gold wash/mitt combo works every time :)

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4700148
Share on other sites

sorry to hijack a bit here just thought while we were on the topic of cleaning, does anyone have any kind of idea what i could use to spray the back of the car with to degrease or lift some of the crap the exhaust leaves? Some kind of detergent that will break it up so scrubbing it off isn't such a work out?

cheers

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4700245
Share on other sites

sorry to hijack a bit here just thought while we were on the topic of cleaning, does anyone have any kind of idea what i could use to spray the back of the car with to degrease or lift some of the crap the exhaust leaves? Some kind of detergent that will break it up so scrubbing it off isn't such a work out?

cheers

need your self a citrus based wash man, pm me and ill give you some details,

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4701561
Share on other sites

A little kerosene in warm water is a good solvent, or some isopropanol wipes are a good option.

CBC also have sell industrial cleaning wipes which worked wonders at removing the rusty water stains from all over the engine bay on our 1200 ute - they are a general purpose cleaner that can be used on various surfaces and also your skin.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4703824
Share on other sites

^what he said

Also, try Meguiars Clay Bar system, just make sure you use the quick detailer (waterless car wash stuff) with the clay bar. It should take out the caustics too, which is what will damage the paint :( Good luck and let us know how it goes

+1 for the clay bar......best product to get paint back to excellent condition.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4704983
Share on other sites

I find for stubborn bird crap, I soak a regular sponge in water and then plonk it on top of the crap - leave it there for 10 mins and the crap will suck the water in and pretty much fall off the paint once it's rehydrated :rofl:

i do it similar to this but i just use a clean old rag. let soak for 15mins or so, then wash and polish the car straight after. always remember to get bat crap off asap.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4707803
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...