Jump to content
SAU Community

Recommended Posts

Went in to the local and only on the Gold Coast Nissan dealer for a few oil filters and innocently asked what oil Nissan spec'd for an R34GT-t, it was all downhill from there on, I was condescendingly told 'Nissan don't recomend any oils for imports' in a manner that left no doubt that if he had to choose between serving me and a pile of dogcrap the dogcrap would get served first.

Is this a general thing ?

I had heard that Nissan whilst not being encouraging regarding imports were at least mildly supportive regarding OE aftermarket parts.

But maybe that was Mitsubishi ?

:pirate:

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/278272-dealers-twats-same-thing/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

You do get some decent guys at a few dealers but...

many feel that they're subverted by the grey import market > a "Them & Us" attitude.

I wonder if NISSAN JAPAN had even the slightest idea that a two tier mind-set was going to be created around the globe with their performance cars?

It seems to happen at a few Nissan dealerships. I work in Nissan parts, and i'm more than happy to help other import drivers, probably because I know what it can be like trying to find parts for them from my own experiences. But i also know of people who would rather not spend the time on import stuff.

As for your oil, there's no specific imports lubricant guide that i know of, but nissan have a 7.5w30 or a synthetic 5w30 that may be suitable for you.

Yeh its a funny thing with some of the dealers, it's like they don't want to make money. This was real strange to me when I brought my '32's over from NZ in '99, where the Nissan dealers were actually selling imports. The NZ guys were only too happy to take your dollars from you and help you out. When I was in Brisi the only Nissan dealer that was helpful was the Moorooka dealer and they were really quite good, getting hold of all the parts I wanted, even including those window rubbing strips for the doors. I don't know if they are still keen on imports as I have been in the ACT for a few years now but they are worth a try!

It seems to happen at a few Nissan dealerships. I work in Nissan parts, and i'm more than happy to help other import drivers, probably because I know what it can be like trying to find parts for them from my own experiences. But i also know of people who would rather not spend the time on import stuff.

As for your oil, there's no specific imports lubricant guide that i know of, but nissan have a 7.5w30 or a synthetic 5w30 that may be suitable for you.

Thanks for that , I think it comes under the "everyone has to have someone to look down on" school of thought :D stupid bastards, the amount of damage this does the brand is huge not to mention lost revenue , do they think that by being agressively unhelpfull will encourage my wife to go Nissan , dream on she already gave that idea away after encountering an agressive Nissan salesperson , it may be the entire company needs an attitude brush up ?

Whinge over. :D

I changed to Valvolene engine armour 10/30 semi syn by way of default however this whilst giving 2kg/sq cm (24.4 psi) at idle at opperating temperature it only gives 3kg/sq cm (36.6) at 60kph/4th gear which is less than the old rubbish I threw out, I have no idea what is normal but this seems very low to me, I'll do a search , or I'll just phone Nissan---nah---I'll do a search. :laugh:

I've had great dealings with Lakeside Nissan parts depart in SA. When I changed my gearbox they found out what the best grade of oil was for it aswell as how much it should hold. I would highly recommend them to everyone, plus friendly guys to deal with, :laugh: and I've been dealing with them for years. :laugh:

dealers are twats... end of story... ive worked in lots.... just because they have a nissan/toyota/datsun, whatever shirt on... the people there are usually the last to know anything and they are on a need to know basis.. meaning you, by jumping on google etc, can find out stuff before they do.

generally they dont want to waste time with import owners... if farmer joe wants a new diff housing for his 78' landcruiser and big shteeve wants some trd bits for his supra... chances are they'll serve farmer joe first because he wont be a pain, complain about the price, or cause unneccessary stress... and even if it is stressful, farmer joe will complete the purchase.

tooo many times ive done my absolute best to source parts for people, get prices and availabilty from japan or the states, beyond the dealerships means, only to have them turn around and say its to too expensive, takes too long and they can get a/m stuff from goober down the road heaps cheaper and my work has been for nothing, after a while, this takes it toll and the attitude changes accordingly.

cheerio

Lint

I've personally been into the Nissan Dealer Ship on the Gold Coast, several times chasing different parts for my r33, Exhaust manifold studs, exhaust man gasket, turbo/man gasket, few other things i cant really remember now. Altho they werent the friendliest people i have ever met, they did however answer every query i had and each time had the parts in stock i needed :(

I've personally been into the Nissan Dealer Ship on the Gold Coast, several times chasing different parts for my r33, Exhaust manifold studs, exhaust man gasket, turbo/man gasket, few other things i cant really remember now. Altho they werent the friendliest people i have ever met, they did however answer every query i had and each time had the parts in stock i needed :(

Good to hear there's a silver lining.

Yep, time to find another Nissan dealer.

The one at Capalaba was very good. Pretty rare not to see an import in the carpark and the spare part guys are very helpful.

You should hear the response from Toyota or Lexus when you ask Aristo questions. They have no clue and could care less.

Well im in a parts dept, and i go next door for nissan bits, Hornsby Nissan.. the guys there are friendly and will help out with anything they can.

I work for a multi franchise company, but the three biggest being Toyota, Lexus and VW..

From what i have felt the imports or grey market as its known is one that is challenging and u meet alot of different ppl..

These people actually know stuff about their car, make, model, year, enigne, transmission... yet i get some person driving a camry and cant even tell me what year it is or the number plate... its too hard for them to compare pics on the car so i have to go and see what sort of car it is... so i much rather look after import owners... and if its stupidly expensive i may give them a trade prrice or better than trade..

grigor aristos are a beautiful machine to work with... let me know if i can help u with any parts that u are after!!

Yep, time to find another Nissan dealer.

The one at Capalaba was very good. Pretty rare not to see an import in the carpark and the spare part guys are very helpful.

You should hear the response from Toyota or Lexus when you ask Aristo questions. They have no clue and could care less.

I spoke to a guy called Garry in parts at Nissan in Wollongabba (ph 3896 6710) who was very helpfull he informed me that when it come to servicing they can and do do imports also they are one of only three dealers , I think in QLD, who actualy have the Nissan speed-whatever program that enables full integrated access to the stock R34's ECUs , I'm guessing that this is the CONSULT program that the bloody workshop manual is dependant on to work properly.

I'm guessing, and hoping , that I just struck my local and only dealer parts people on a bad day as the Gabba is a fair hoyk for an oil filter.

Bye the Bye Wollongabba Nissan are moving to Mnt Gravatt on the 24th this month.

Edited by BASHO

Sometimes it's just the person you get at the time you walk in there I guess.

I get R34 bits from Lennock Nissan sometimes (usually just filters) and the guy I normally go in and see is really great, get me what I need (eg. got me a couple of breather hoses from Nissan Japan fairly quickly) and has a chat etc. Even asked to see my car once and brought the workshop guys out too.

But once or twice I get this guy who's mood changes completely when I ask him for R34 bits, he suddenly looks down on you and either tells you "we don't have parts for private imports" and walks off, or goes in the back and has a look for literally no more than 4 seconds, sticks his head out around the corner and says "No you'll have to try one of those aftermarket workshops" and then walks off.

Anyway, I guess it can depend on who you get on the day.

I've spoken to a few dealers around Syd and most have seemed happy to help. In saying that, they definately charge you for that help.

As an example, the last item i priced up was $150 more expensive from my local Nissan dealer than from Just Jap. And the price from Just Jap was $140 :-)

As much as they can provide the parts it'll always be an absoluet last resort to even get a quote from them from now on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...