Jump to content
SAU Community

Recommended Posts

Lol Funky, that's the one. So there's no way to get rid of the surge? I either have to live with it or get a stock bov?

My bov was leaking so that's why I replaced. And how bad is this for the turbo? Is it just bouncing around in the pipes or would it actually hurt the turbo?

I've noticed it pop sometimes but is that just flames or is that a small backfire? (backfire's shocks would hurt the turbo...)

Edit: I'll try to upload a video of the sound it makes and how it's set up this friday as well.

Edited by Nasedo
Link to comment
https://www.sau.com.au/forums/topic/278645-new-bov-surge/#findComment-4713812
Share on other sites

It wasn't, I bought it from Repco in NZ. Not everyone can afford to spend $500 on a blow off valve. Especially when it's not needed yet.

Well my mechanic advised me that the stock one was leaking.

If it doesn't hurt the turbo then I don't really care what it sounds like, but that's my main concern. If this is what it's meant to sound like then that's fine with me.

Thank you for all your support and input everyone. :P

Edited by Nasedo
Link to comment
https://www.sau.com.au/forums/topic/278645-new-bov-surge/#findComment-4715243
Share on other sites

Lol Funky, that's the one. So there's no way to get rid of the surge? I either have to live with it or get a stock bov?

My bov was leaking so that's why I replaced. And how bad is this for the turbo? Is it just bouncing around in the pipes or would it actually hurt the turbo?

I've noticed it pop sometimes but is that just flames or is that a small backfire? (backfire's shocks would hurt the turbo...)

Edit: I'll try to upload a video of the sound it makes and how it's set up this friday as well.

I have been running my blocked off BOV on my RB25DET for about 2 years now and no problems what so ever.....still running the same stock turbo and 12psi through it daily mate.....

If your after a BOV then i have a GFB Stealth FX up for sale mate.....PM me if your interested.....

http://www.subaruxtras.com/subaru/images/1009red.jpg

Thats what it looks like....and its got an option of either plumb back or atmo...

Link to comment
https://www.sau.com.au/forums/topic/278645-new-bov-surge/#findComment-4715347
Share on other sites

If you are certain this is a surge sound, I am guessing your BOV is incorrectly installed.

OR

Are you positive your stock one was leaking? Perhaps it was actually the vacuum line leading to it (leaking/disconnected), hence the new BOV isn't opening.

Link to comment
https://www.sau.com.au/forums/topic/278645-new-bov-surge/#findComment-4715372
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...