Jump to content
SAU Community

Recommended Posts

Hi Guys,

Here is a question for you track gurus out there.

I am a true track amateur with my GMG R35.

I intend to track the car in a few weeks and they require a fire extinguisher to be installed in the car.

Where can I get it done?

How do they do it?

Does it require welding or drilling?

How much does it cost?

Would be good if you could post some photos of the install.

Thanks in advance.

:)

I was thinking of knocking up an alloy bar (with appropriate bends for clearance) which bolts onto the rear passenger seat floor bolts, such that the extinguisher sits in between the seat rails. How big an extinguisher do you want/need, 1kg? Should be easy to install/remove with no drilling etc.

Edited by LSX-438
I was thinking of knocking up an alloy bar (with appropriate bends for clearance) which bolts onto the rear passenger seat floor bolts, such that the extinguisher sits in between the seat rails. How big an extinguisher do you want/need, 1kg? Should be easy to install/remove with no drilling etc.

I think the pre-requisite is that it needs to be easily accessible, so it needs to be in front.

My friends 911 and BMW have it stuck to the front seat structure.

Just don't know who in Melbourne can do it.

Thanks.

I think the pre-requisite is that it needs to be easily accessible, so it needs to be in front.

My friends 911 and BMW have it stuck to the front seat structure.

Just don't know who in Melbourne can do it.

Thanks.

i am not sure there would be much of a difference bewteen the front and back in terms of accessibility, perhaps sit in the car and see? It could be the back is more accessible if you are using a harness. But I guess you could do the same thing for the front?

BTW i found this adjustable one which might work?

http://www.ogracing.com/catalog/2-Car/30-F...INGUISHER-MOUNT

Dunno if it would fit on an R35 though. I'll be keen to see what you come up with, i need something too. A friend of mine came up with another idea (perhaps temporary given your requirements); buy some straps with metal clips from bunnings, sit the extinguisher mount in the crack between the passenger seat back and seat bottom, and thread the straps through the crack to the back seat rails (or under the seat somewhere) and strap it down there. It will then just sit in the pax seat, easily removeable.

If you are looking for someone to make something that bolts onto the seat rails, i would look up an alloy welder / fabricator in your area?

for cams events you generally need a minimum 1kg dry powder type extinguisher. usually can be had for around $50 and they must be mounted with a METAL bracket. do not buy the ones that come with a plastic mount.

for my car I then made a very basic mount for the fire extinguishers mount to fit to out of a piece of aluminium stock lying around. linished the corners smooth, drilled some holes and voila! it fits by using the 2 front anchorages of the front passenger seat.

the rules state it must be able to be reached by the driver without taking belts off or getting out of his seat. so you may be able to reach it either in front of or behind the passenger seat. try it and see.

mine is very basic, but works, passes scrutineering and takes about 2 mins to fit to the car and needed no holes drilled or welding done.

dsc003476eq.jpg

dsc003496bp.jpg

dsc003461gu.jpg

I was thinking of knocking up an alloy bar (with appropriate bends for clearance) which bolts onto the rear passenger seat floor bolts, such that the extinguisher sits in between the seat rails. How big an extinguisher do you want/need, 1kg?

What some people do is mount a second larger extinguisher in the car so that if one extinguisher is not enough, then you have a second one on hand - especially in case of a fuel fire.

You can find a video here of when the supercharged 911 caught fire at Wakefield ...

The supercharged 911 fire was a fuel fire at the track. As you can hear in the video, the small extinguisher was not enough to put it out. Though it doesn't look like a huge fire, the damage was very expensive to fix, and even things like the headliner in the interior needed to be replaced after the fire.

My car caught fire (an oil fire) on the road a few years ago, where oil leaked onto exhaust headers and caught fire, and the small extinguisher was barely enough to get it out. After that I ALWAYS carried two fire extinguishers in the car - one up front, and a second larger one behind the passenger seat.

At the end of the day, if your car catches fire you want as much chance as you can get to get the fire out quickly, and of course you have to engineer the mounting carefully so that the fire extinguishers are safely mounted.

- Adam

the rules state it must be able to be reached by the driver without taking belts off or getting out of his seat.

That is a VERY important point beer baron.

The thinking behind that may be so that if a driver is trapped in a car on fire, he can at least have a chance of reaching the fire extinguisher to stop himself from getting burnt.

- Adam

yeah 1 X 1kg extinguisher is the minimum requirement for pretty much any entry level track event, and it also must have metal mounts and must be accessible to drive with belts on. of course if your car is really on fire it wont be enough. having more is good too, but a real fire will need some serious extinguishers and carrying all that weight is just not practical for most. but the marshal points all have giant 20kg+ ones which are exactly what is needed for any decent fuel or oil fire.

the idea is if possible, if you think your car is on fire, is to stop as close to a marshal point as you can, get the fk out with your little weenie one, spray it in the air to get some attention then light another smaller fire under the nearest marshal to get him over to your car with his big boy extinguisher which can actually put the fire out. obviously if you know it's a small fire then pull off immediately and put it out yourself, but the closer you are to the marshal when your car lights up the better chance you have of getting it out of there relatively intact.

conversely if you have a very small oil fire and have quickly shut of engine (stopping oil flow) or perhaps a small piece of insulation or something is on fire and know you can put it out with your small extinguisher do that. sometimes marshals get a bit over excited at the sight of a small flame and will discharge their massive extinguisher all over your engine bay and interior, or down your pants for good measure which completely fks everything up and makes a mess you can only imagine. some of the stuff can also be corrosive which is not nice in your predominately metal car. if it is a tiny little thing and you know it can be put out without all that then do whatever you can to stop the marshal blowing his load into your engine bay. the clean up is not pretty and could completely fk a number of things.

even better is have a properly maintained and monitored car that doesn't catch on fire. that would be my advice.

yeah 1 X 1kg extinguisher is the minimum requirement for pretty much any entry level track event, and it also must have metal mounts and must be accessible to drive with belts on. of course if your car is really on fire it wont be enough. having more is good too, but a real fire will need some serious extinguishers and carrying all that weight is just not practical for most. but the marshal points all have giant 20kg+ ones which are exactly what is needed for any decent fuel or oil fire.

the idea is if possible, if you think your car is on fire, is to stop as close to a marshal point as you can, get the fk out with your little weenie one, spray it in the air to get some attention then light another smaller fire under the nearest marshal to get him over to your car with his big boy extinguisher which can actually put the fire out. obviously if you know it's a small fire then pull off immediately and put it out yourself, but the closer you are to the marshal when your car lights up the better chance you have of getting it out of there relatively intact.

conversely if you have a very small oil fire and have quickly shut of engine (stopping oil flow) or perhaps a small piece of insulation or something is on fire and know you can put it out with your small extinguisher do that. sometimes marshals get a bit over excited at the sight of a small flame and will discharge their massive extinguisher all over your engine bay and interior, or down your pants for good measure which completely fks everything up and makes a mess you can only imagine. some of the stuff can also be corrosive which is not nice in your predominately metal car. if it is a tiny little thing and you know it can be put out without all that then do whatever you can to stop the marshal blowing his load into your engine bay. the clean up is not pretty and could completely fk a number of things.

even better is have a properly maintained and monitored car that doesn't catch on fire. that would be my advice.

Gold.

Some things to remember.

1. If the engine bay is smoking then people tend to get excited & reef the bonnet open. Which is a great way of flaring the fire up & getting a face full of flame. So do it slowly.

2. The best way of fighting a fire with a 1kg extinguisher is to throw the said extinguisher at the fire & bravely run to the nearest mashalling post. But like teh Baron says it will be the highlight of the said marshals day & a nightmare for you cleaning it all up. Which you should do as soon as is practically possible as that stuff eats electrical connections and alot of other things besides.

3. You R35 owners need to harden up. Nothing shows pride of ownership like tec screwing the extinguisher bracket to the floor of your car. Just try not to put a screw through a fuel line. :P

Gold.

Some things to remember.

1. If the engine bay is smoking then people tend to get excited & reef the bonnet open. Which is a great way of flaring the fire up & getting a face full of flame. So do it slowly.

2. The best way of fighting a fire with a 1kg extinguisher is to throw the said extinguisher at the fire & bravely run to the nearest mashalling post. But like teh Baron says it will be the highlight of the said marshals day & a nightmare for you cleaning it all up. Which you should do as soon as is practically possible as that stuff eats electrical connections and alot of other things besides.

3. You R35 owners need to harden up. Nothing shows pride of ownership like tec screwing the extinguisher bracket to the floor of your car. Just try not to put a screw through a fuel line. :(

yep, on point 1 now that all cars have to have the stupid secondard bonnet restraint most run a short length of cable which is good as it stops you reefing up the bonnet in a panic and allows you just enough to open it 10-15cm to see whats happening and where to point your extinguisher.

lol, I'm pretty sure Russ's R35 gained a few holes pretty rapidly after taking it off my hands.... :D

I think we can both agree that in the case of a REAL fire (ie not a small piece of dangling electrical tape burning on your exhaust manifold) then a single 1kg extinguisher or 5 of them will do bugger all. I still think discharging it into the air, or pegging it at the marshal will get quick response but perhaps you are right with just open the bonnet a bit, have a peak, then lob it in there like a grenade. the theory being if the fire is small it will burn out from lack of oxygen, if big it will explode the extinguisher like a fire killing grenade! win win.

  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...