Jump to content
SAU Community

Recommended Posts

Just to let you know from August 1st "car owners will be limited to raising or lowering their suspension by no more than five centimeters" and even this will require an approval certificate from an RTA engineer saying it meets safety standards

Currently you dont need approval upto 5cm and can go upto 15cm with proper approval

Typical press release from politician who has absolutely no idea what he is talking about. Michael Daley quite obviously hasn't got a clue. A very confusing press release with conflicting wording and contradictory statements. We will just have to wait for the pubic service bureaucrats to sort out another mess created by their minister.

Cheers

Gary

so anyone who has already lowered their car up to 5cm will also have to get a cert or risk being fined/defected from Aug 1 ? What the hell... Mine's lowered only 2cm or so from stock and I was planning on dropping it another 2cm when i put new springs in.

Any ideas how much the engineers cert for the suspension might cost ??

Edited by Delta Force

Someone will need to tell him that every used car is lower than a brand new car, it's called settling and it happens to every car. The older the car, the more k's the greater the settling. The Recognition Documents for cars that are lodged by their manufacturer with DOTARS (for ADR approval) shows their new height. So his ministerial limo needs approval because it's lower than its recognition document height. Arrest him he's a hoon. :)

Cheers

Gary

Why cant an automotive engineer or similar write these type of laws? Even a little input would be good, politicians have no idea, what a joke. Anyway the article...

Permission now needed to lower cars

16 July 2009

NEW laws making it an offence to raise or lower a car's suspension without proper approval is about saving lives, New South Wales Roads Minister Michael Daley says.

From August 1, car owners will be limited to raising or lowering their suspension by no more than five centimetres, and all modifications will need approval from Roads and Traffic Authority engineers. Currently, a car can be raised or lowered by up to five centimetres without approval and by up to 15 centimetres with approval.

Mr Daley says while drivers may think a lowered car looks "cool" it really is dangerous and any adjustment of more than five centimetres doesn't belong on the road.

"I don't want to see young hoons putting their lives or the lives of others at risk, just because they think their car looks better 15 centimetres closer to the ground," Mr Daley said.

"Raising or lowering a vehicle's height can put the driver, passengers and other road users at risk.

"It can affect handling, braking and safety features such as electronic stability control."

Any vehicle that is raised or lowered after August 1 will have to carry a certificate stating that the modifications confirm to safety standard requirements.

So wait ... they gave everyone 2 weeks to get an engineers certificate ? I suspect there are tens of thousands of lowered cars, how's that gonna work in 2 weeks? Unless of course this is just another cash grab because they know it's not gonna happen in such a short period of time.

If they want everyone to comply, they should make it free of charge to go to the RTA and have an engineer look over it and issue a certificate/defect.

isnt the RTA for nsw..?

jason your gtr is safe

oh........

well let me send my best wishes to n.s.w import owners

it will be a sad day for all

can we all pause for 1 minute of silence for our fallen brothers.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

thank you and may you all have fond memories of being low

I may be missing something but how does lowering your car decrease performance to a state where it is dangerous?

I mean fair enough if its dragging along the ground but an extra couple of centimeters lower? really?

"Any vehicle that is raised or lowered after August 1 will have to carry a certificate stating that the modifications confirm to safety standard requirements."

So, by interpretation of that statement...cars that have been lowered before that date do not have to carry the certification. Go out and buy a set of adjustable coilovers...

wishful thinking ... I'm pretty sure they meant any car not at stock height after 1st August ... not any car that has the mods DONE after 1st Aug.. How on earth would anyone know the date of when you lowered your car ?? They wouldn't, so your interpretation can't be right.

Invoice from a workshop for the installation?

I'm just pointing out that it's incredibly flawed. The fact that so many existing lowered cars would have to go out and search around for / buy some stock height suspension, it's a complete wank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...