Jump to content
SAU Community

Recommended Posts

Hi guys, I'm in a bit of a rush to get my car ready to leave for alot of work that will be completed in november. So I have finally gotten around to spending some time with the ratchet and getting off the parts that I want to sell.

What's remaining that I would like to get rid of today are ;

Genuine Ganador CF finish mirrors for r34 with the blue tinge lens.

$500 outright or $400 swap with standard mirrors.

Work S2R rims , good rubber all round, 18x9 , 18x10.5, good agressive offset, fill r34 guards, rears will need to be rolled. $1500 or $1200 with trade for any r34 5 stud stockies/na stockies that will fit.

Apexi AVC-R, good working order, $350

Signal CF bonnet with nose piece, $1200 or $900 swap over

Pair of Recaro Millenium with r34 rails, small rip on passenger seat from my belt, apart from that i'd give em a 7.5/10. $ 800!!!

The fabled TK dash, $750 or $550 with swap of standard cluster.

All pics of everything can be seen in my other threads.

All prices negotiable,

i'll be pulling this shit out all day so sms me on 0421 120 034.

Thanks ya'll.

Mods, if you'd be so kind to leave till around sun down, that'd be appreciated.

Located, inner east.

Link to comment
https://www.sau.com.au/forums/topic/279777-pulling-parts-of-my-car-today/
Share on other sites

Always intended on going Craft Square's so still not sure =/

eat the pudding eat the pudding eat the pudding eat the pudding eat the pudding eat the pudding eat the pudding

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...