Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

sooooo do we need just one more person for this to go ahead?

Pretty sure we're good to go with 4 people. Jap rails are getting sent down in the next couple of days, and ccubed are organising individual invoices. Darrinspencer will have more details shortly... :P Hanging out to have a complete car again!

  • 2 years later...

Also, are they still available? (ie: another run?)

I do own a pair....That Darrinspencer currently has in his possesion...who i keep meaning to call( My apologies!!) that I will be selling due to the fact i know longer have a C34.

I do own a pair....That Darrinspencer currently has in his possesion...who i keep meaning to call( My apologies!!) that I will be selling due to the fact i know longer have a C34.

No stress mate, we are always too busy

Sorry to kill your possible sale

After waiting 13 months to get these made, the quality was shit.

They were suppose to take 6-8 weeks to get made!

Have a look when this thread originally started!!!

The guy was well capiable, recently making all the carbon work for Handbrake's mega R35 GTR build, but managed to totally give us a crap job and charge us for poor service.

I have had to fully bog the entire length to get them flat

Will be in primer either this weekend or next

They are not good enough to just paint and fit.

  • 2 weeks later...

Any of you guys tried to use the existing plates with some fibreglass mods to bolt them down and clean them up in the sections where the racks went through them?

Ive got a spare pair of rails i'm thinking of trying this with. Should cost much (like $20 in fibreglass and resin). I'm just assuming there is a reason it hasn't been tried yet

Any of you guys tried to use the existing plates with some fibreglass mods to bolt them down and clean them up in the sections where the racks went through them?

Ive got a spare pair of rails i'm thinking of trying this with. Should cost much (like $20 in fibreglass and resin). I'm just assuming there is a reason it hasn't been tried yet

I did have a original plan of fully covering the entire roof strip in 1 or 2 layers of fibreglass, then bog and sand and paint.

The problem with the roof strips they are covered in a rubber/plastic coat over s/steel metal.

Too hard to remove the coating, plus the front end is approx 4-5cm long of solid plastic, not metal.

Still worth a try.

Pics of the fibreglass ones we bought

This was last weekend. Now both sanded and getting undercoated this weekend

Edited by darrinspencer

I did have a original plan of fully covering the entire roof strip in 1 or 2 layers of fibreglass, then bog and sand and paint.

The problem with the roof strips they are covered in a rubber/plastic coat over s/steel metal.

Too hard to remove the coating, plus the front end is approx 4-5cm long of solid plastic, not metal.

Still worth a try.

Pics of the fibreglass ones we bought

This was last weekend. Now both sanded and getting undercoated this weekend

this is what u should of done before u painted urs Darrin

post-41608-0-98445200-1319227463_thumb.jpg

  • 2 months later...

Does anyone have a picture of how the roof is bonded to the chassis?

I'm having my Stag re-sprayed in a few months time & the paint shop says it's dinted to hell & may be better to replace entire roof. I would love to find a dual sunroof car & convert mine.

3 quotes I've had so far range from $6600 to $9000 for full job including fitting this kit (supplied by me) http://www.freeway-dolphin.co.jp/aeroform/stagea/nissan_stagea_c34-wh.htm

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...