Jump to content
SAU Community

Recommended Posts

Just wondering if anyone has one instatted in any car, but particularly a RS4 Stagea.

I've got a few questions

1. How many press/temp sensors can you add?

2. Does it come with any pressure sensors or anything standard?

3. What exactly does it display strait out of the box?

4. I basically want to display, oil press, water temp, boost pressure, knock. Is this possible with this unit, or is there a better option?

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/
Share on other sites

Just wondering if anyone has one instatted in any car, but particularly a RS4 Stagea.

I've got a few questions

1. How many press/temp sensors can you add?

2. Does it come with any pressure sensors or anything standard?

3. What exactly does it display strait out of the box?

4. I basically want to display, oil press, water temp, boost pressure, knock. Is this possible with this unit, or is there a better option?

I got a Blitz r-vit TypeII in my r32 skyline.

It plugs into the consult port near the fuses.

It only shows ECU details.

Doesnt have any external sensors, only reads ecu information. (no different to plugging a laptop with consult cable)

Displays all sensors which the ecu reads;

water temp, afm voltage, o2 voltage, injector duty cycle, ignition timing, battery voltage, speed, rpm

In regards to question 4, you are after a single unit which can display external sensors for water temp, oil press, boost press etc.

Only option ive found on the internet is Defi Link - http://www.nengun.com/defi/link-display

Although after buying all the sensors etc, it will set you back close to $1k :)

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4729129
Share on other sites

Displays all sensors which the ecu reads;

water temp, afm voltage, o2 voltage, injector duty cycle, ignition timing, battery voltage, speed, rpm

So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere.

A Blitz unit looks like the pick of the ones on nengun for me. The Blitz MMD might be a goer with the boost sensor, included. Not sure on the differences between all the different units. The MMD with another pressure sensor would probably do the trick.

I'd go ask at my local supplier, but that's AutoBahn, they wouldn't have a clue.

Why the hell didn't the stag come with an oil pressure guage anyway!!! It doesn't already have a sensor does it?

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730842
Share on other sites

So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere.

A Blitz unit looks like the pick of the ones on nengun for me. The Blitz MMD might be a goer with the boost sensor, included. Not sure on the differences between all the different units. The MMD with another pressure sensor would probably do the trick.

I'd go ask at my local supplier, but that's AutoBahn, they wouldn't have a clue.

Why the hell didn't the stag come with an oil pressure guage anyway!!! It doesn't already have a sensor does it?

only shows ignition timing degree value thats all.

Also, the blitz r-vit only works on standard ecu's. If you have a powerFC it wont work.

If you're using a standard ecu, they have knock protection anyways and will switch to safe map if anything goes wrong.

The blitz r-vit also works with chipped standard ecu's such as nistune (where you can tune the knock map to protect car etc)

Else the powerfc, i believe, shows knock reading and flashing light but thats all you get. No safe map switching as standard ecu

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4730891
Share on other sites

there was a guy on here called newKleer or something like that

he made a 4 chan temp monitor - have a search .. looked pretty good

that was mearcat. i think thread for it is still in group buy forum, probably closed by now.

So does it display knock values? I know the computer sees them but I haven't seen it mentioned anywhere.

nope, consult doesnt give u knock reading, neither does it have oil temp or oil pressure or boost.

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731159
Share on other sites

I've got an Emanage, not sure what sort of knock protection it has. Are there any tricky guage mounting options for a stagea with a factory tv setup?

you can get 3 guage pods that sit ontop of the dash above the centre vent that look pretty nice

i've also got some guages here if you're looking for some :blush:

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731557
Share on other sites

the mrs and i are highly interested in gauge mounting position too mate. if yu come up with something that isn't obtrusive, doesn't take away a vent, doesn't block the clock and is still easy enough to see whilst driving, let me know, lol. i'll keep looking and return the favour if you want :blush: how many gauges are you looking at having and what size faces?

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4731639
Share on other sites

you can also get guage plates that mount where the passenger side airbag is, fairly popular in japan but i wouldn't recommend it. you can always mount the guages in the glove box, leave it open when you want to see them and keep it closed when you don't want anyone else too

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4732034
Share on other sites

haha, i could see the passenger airbag thing being pretty disasterous :P

so far we're thinking 1 near the a pillar, 2 in the ash tray (not quite too sure how we're gonna achieve that mean feat, but we'll see how we go) and the 4th one in the glove box... still early days yet though. noone makes cars to hold gauges!

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4732458
Share on other sites

What guages heve you got MIKE?

I was thinking about making up a panel that covers the ash tray and cig lighter to take 3 or 4 52-60mm guages. Then wire a cig lighter plug into the centre consol. I want atleast 2 guages, oil press and boost. If i can fit more in I'll also put in a oil temp and water temp.

If i could wire a switch between 3 sensors I'd have the temp guage so it can display water, oil and trans temps. Not sure if it's possible, but I don't see why not

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4733235
Share on other sites

If I was to get something made up, to hold guages in the area below the din panels, over the cig lighter and ash tray, would people be interested in getting one also?

What i'm planning is to make up a mould to fit the area perfectly. Then lay in a few layers of carbon fibre, once it's set I'll trim them up. If a few people would like them, or i couldn't get it looking good, I'd get the carbon fibre work done professionally. But by machining up a nice mould it should make things much easier either way.

Link to comment
https://www.sau.com.au/forums/topic/280296-blitz-r-vit/#findComment-4735604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...